I have purchased a CarPC much like this one from China:
http://www.parkly.com.cn/Simplified/ProductView.asp?ID=148&SortID=146
All the "normal" functions (radio, calling, bluetooth, tv) are not android, but the GPS has been replaced with a Android 2.3 installation..
The problem here is that the Android installation is very minimal and does not include android market...
I would try to fix it myself, but i'm missing adb access.. Also, I can get into an update mode (recovery mode) but there are no physical buttons connected to the android system.. so I can't select anything, just getting the android icon with the triangle because no update exist..
There is a usb plug on the back of the radio, which is normally use for a WIFI stick.. I have tried to connect a usb keyboard, which works fine in normal mode, but no effect in recovery mode..
There is a small 10-pin plug in the lower right corner of the unit (see pictures), I suspect this to be a adb connection, but have no idea on howto create a cable for it...
The unit is based on the TCC8900-series.. So maybe someone out there has some ideas???
Hope someone can help me get ADB connection to this carpc...
http://www.parkly.com.cn/Simplified/ProductView.asp?ID=148&SortID=146
All the "normal" functions (radio, calling, bluetooth, tv) are not android, but the GPS has been replaced with a Android 2.3 installation..
The problem here is that the Android installation is very minimal and does not include android market...
I would try to fix it myself, but i'm missing adb access.. Also, I can get into an update mode (recovery mode) but there are no physical buttons connected to the android system.. so I can't select anything, just getting the android icon with the triangle because no update exist..
There is a usb plug on the back of the radio, which is normally use for a WIFI stick.. I have tried to connect a usb keyboard, which works fine in normal mode, but no effect in recovery mode..
There is a small 10-pin plug in the lower right corner of the unit (see pictures), I suspect this to be a adb connection, but have no idea on howto create a cable for it...
The unit is based on the TCC8900-series.. So maybe someone out there has some ideas???
Hope someone can help me get ADB connection to this carpc...
![1.jpg](/proxy.php?image=http%3A%2F%2Fwww.martin-juhl.dk%2Fcarpc%2F1.jpg&hash=1fcae03a4ba542388e1183d62369782d)
![2.jpg](/proxy.php?image=http%3A%2F%2Fwww.martin-juhl.dk%2Fcarpc%2F2.jpg&hash=fd8d20ccdedc70571b5eb3d2ae7df803)
![3.jpg](/proxy.php?image=http%3A%2F%2Fwww.martin-juhl.dk%2Fcarpc%2F3.jpg&hash=27fa993a823722d83b1c6fb2cce90a25)
![4.jpg](/proxy.php?image=http%3A%2F%2Fwww.martin-juhl.dk%2Fcarpc%2F4.jpg&hash=4b323f00d85195f66fce01c9b30908c4)