Accidentally installed eken m002 firmware and all inputs voided + unable to update!

[Scribbleno1]

The ROM I downloaded was called "M002S_2.0_Plus.7z" - it booted up properly however the touchscreen didn't work and the update process never worked! So then I tried putting an eken m001 ROM, that is meant to solve most issus of an epad, on it - now the backlight only works in recovery mode and when it does start up - after putting an SD card with an incomaptible update.zip in - it's touch screen still doesn't work!

 

[RomanticEvil]

Hi scribbleno1, I'm afraid you need to post info about your tablet, we can't see from here which tablet you have!

 

[Raymond_the_Red]

FYI
I hope you got that info before you started your updates. From what I've gleaned from the Eken website, all the model ending in S (as in M002S) have the newer WM8650 CPU. However, upon looking for info on the models without the 'S' (M009) it appears that they use the WM8505 CPU. These CPU's are different enough that the firmware must be rewritten for each type of CPU.

I hope you get it working again.