[ROM] Ployer/Generic 7" A13 [ Android 4.0.4 Hyper Edition ]

[tragidy]

Donations are always accepted!

[Ads]

[Mucky2]

@tragidy,can i Flash this Rom without problems?

Gezappt via Tablet

[dssamusaran]

Hello Tragidy

I've an Allwinner A13 7" tablet, and wonder if your rom could work on it.
It's this one => AllWinner A13
I read the topic and from my point I didn't see any problem at first sight.

My aim by upgrading is to correct a little offscreen in the bottom of my screen. Do you think a new rom could help?

And last question. If I post you a lsmod result can you say if you think that it should work or not?

(And yes I understand that I take the risk and you don't endorse it )

((And sorry for my bad english))

[ripnard]

Hello Tragidy

I've an Allwinner A13 7" tablet, and wonder if your rom could work on it.
It's this one => AllWinner A13
I read the topic and from my point I didn't see any problem at first sight.

My aim by upgrading is to correct a little offscreen in the bottom of my screen. Do you think a new rom could help?

And last question. If I post you a lsmod result can you say if you think that it should work or not?

(And yes I understand that I take the risk and you don't endorse it )

((And sorry for my bad english))

Looks the same as mine. ROM for popular Amazon allwinner a13 7" tablet

If so this new ROM does work with some touch screen issues.

I am going to go back to my supplier as the ROM they sent me (the one in that thread I posted) means I don't get any touch working. Tragidy's new Dec 13th one does work (inc Camera and GSensor) but the touch screen touch area appears to be off centre (about 1 CM across and down from top right) and also goes wrong after about 5 mins, thinking I am constantly pressing the left hand side of the screen.

Anyone have any ideas why that may be the case?

[pjrollo2000]

i have a momo9 9" star and this rom dose not work the touch screen doesn't work the earlier rom worked fine can you make this rom compatible with the ployer momo9 9" star

[Mucky2]

Hello Tragidy

I've an Allwinner A13 7" tablet, and wonder if your rom could work on it.
It's this one => AllWinner A13
I read the topic and from my point I didn't see any problem at first sight.

My aim by upgrading is to correct a little offscreen in the bottom of my screen. Do you think a new rom could help?

And last question. If I post you a lsmod result can you say if you think that it should work or not?

(And yes I understand that I take the risk and you don't endorse it )

((And sorry for my bad english))

Have the Same!

Gezappt via Tablet

[tragidy]

Its your choice to try it but its explicitly for momo products.

[Emporium]

i have a momo9 9" star and this rom dose not work the touch screen doesn't work the earlier rom worked fine can you make this rom compatible with the ployer momo9 9" star

I second that... Previous ROM worked fine on my momo9 star... But this one, the touch screen is a no go... I tried hitting the RESET button (just in case), but no difference.. Hard buttons on side do respond, since after first boot, the Volume toggle switch did respond. I guess I'll go back for now... Maybe some driver was removed..

Thnx for all the hard work.. Much appreciated..

And Happy Holidays...

Cheers..

[CombatGerbil]

This ROM is for the 7" MOMO 9 II and III A13 (this one specifically is based on the 9 III ROM). As has been previously said... ad nauseum.. that other devices may or may not work with these ROMs.. Why must people then continue to bleat when it does not work on their device. If you do not make a backup of your original ROM or have another copy, then it's your fault if you end up with a paperweight.. Continually asking the Dev to tweak it for your specific device is non productive and as has been said, will not be done the Dev does not have all your pedantic knock off devices.
I sometimes think... more and more often when I read threads with posters like these, that some people really shouldn't be allowed to use technological devices, let alone try to Flash a new ROM without knowing what the hell they are doing. If it doesn't work and you can flash back to your backup... then do it and move along.. if it bricks your device, don't say you weren't warned and likewise.. move along. For some devices, people complain there are no devs working in them, there's a reason for that.. a lot of clones and knock offs are too crap to bother with. And as a parting note... READ the bloody thread before posting the same old... "will it work with such and such a crappy device?? " or "it doesn't work with such and such a device.. why is that and can you fix it??" As I swear some of you can barely read and I am surprised that you have the ability to post your useless drivel in the first place.
Apologies to the reasonable folk on this thread... and as for the rest of you, I wouldn't trust you to sit the right way round on a toilet.
Rant over... for now..

[bettyblue]

Hi, I'm new to this tablet.. But I'm pretty sure I bricked it trying to update it. The screen only goes to android recovery system 3e. I have a 32gb external sd and I've tried loading the firmware onto and flashing it directing but all the firmwares are unsigned. So I get the error. E: Signature Verification Failed. I've tried using Live Suite and Phoenix USBpro. But I don't seem to know how to use it correctly. The computer keeps on saying I don't have the correct drivers installed. Do you guys know where i can get the drivers so the computer can pick up the tablet when i plug it in? I've done all the steps for livesuite but the computer doesn't pick up the tablet. Please help. Happy Holidays! Thanks in advance. I have the MOMO9iii and I'm using windows 8. Just in case you need it.