This version may work with a mcpad screen, try it and post results if you wish.
Or alternatively if the vendor McBub wanted to provide hardware for development that would also make this seamless...
08-03-2012 12:08 PM
thanks for trying to help us. Tried firmware now and there are several problems with screen.
1.) Screen picture shifted aprox 1cm left.
2.) Touch screen is like inverted....when i want to click home buton, it open "task bar", when I click "task bar" it click one of back/home/volume buttons. When I want to unlock screen, I have to touch like half a screen left from unlock icon and point other way than I should (unlock should be to right, i have to point to left). Left-right inverted, up-down is ok.
Is there anything you could do with that?
EDIT: Wifi and audio Working, accelerator doesnt.
EDIT2: Best align and right orientation of touch screen i have with this firmware (but no accelerator function, I just didnt know how to backup original ROM and now I kinda regret it....only kinda, with original ROM tablet randomly freezed).
Last edited by NoreiT; 08-03-2012 at 02:27 PM.
this firmware is the original ROM ?
Originally Posted by NoreiT
By my suplier it is original ROM, but I have seen after first run (after tablet arrived) newer version thank this link. But I dont mind, with this ROM tablet at least does not freeze. Eventhough accelerator does not work with it.
Originally Posted by mrspock
Anyway, I would love to use 4.0.4 Hyper Edition, only problem now is offset of screen, mirrored touch screen, and accelerator, otherwise everything is working like a charm.
Could someone with "McBub" clone do lsmod in Android Terminal for me? I would like to find out which driver Im missing in my system, so I could try to load some and see if accelerator is working. I wrote to my supplier but so far no answer.
Last edited by NoreiT; 08-05-2012 at 10:44 AM.
I have moved on from the A13 chipset, as I have moved onto Aniol ELF and Burning development, this rom is currently very stable and the screen is fine, so is the meter, you simply have a incompatible tablet.
Cheers and good luck to those of you with A13 Generation 1 processors Sun5i
Tragidy please help. My G-Sensor is -90 degrees off. And the camera doesn't work as well. Any ideas on how to fix this manually? Bmorn V16(MOMO9 Clone)
Originally Posted by NotPaulG
I do not have that device nor can I see that its a ployer based a13
Sent from my ELF 2
will this rom work with this ? I can't find goodix display anywhere. But not really sure which one from below is display.
app_48@android:/ $ export PATH=/data/local/bin:$PATH
app_48@android:/ $ lsmod
8192cu 575431 0 - Live 0xbf0c0000
dmard06 11119 0 - Live 0xbf0b9000
cdc_subset 1588 0 - Live 0xbf0b5000
cdc_eem 2915 0 - Live 0xbf0b1000
cdc_ether 7651 0 - Live 0xbf0ab000
cedarx 9351 0 - Live 0xbf0a4000
mcs7830 7581 0 - Live 0xbf09e000
qf9700 9152 0 - Live 0xbf097000
rtl8150 10305 0 - Live 0xbf090000
asix 24601 0 - Live 0xbf084000
usbnet 26229 6 cdc_subset,cdc_eem,cdc_ether,mcs7830,qf9700,asix, Live 0xbf077000
mali 151102 20 - Live 0xbf045000
ump 49310 31 mali, Live 0xbf031000
sw_keyboard 2489 0 - Live 0xbf02d000
ssd253x_ts 15717 0 - Live 0xbf025000
sun5i_csi0 30803 0 - Live 0xbf018000
gc0308 18408 1 - Live 0xbf00f000
videobuf_dma_contig 6251 1 sun5i_csi0, Live 0xbf00a000
videobuf_core 20242 2 sun5i_csi0,videobuf_dma_contig, Live 0xbf000000
Can you do a uname -a
Sent from my Smart ELF II 4.1 using Tapatalk 2