-
Help identifying unbranded tablet
Hello everyone,
A friend gave me this unbranded android tablet that stays freezed at boot. Can you help me identify it?
I would like to do a factory reset for the moment. Since I cannot look at any files in it, I will tell you the buttons it has and attach some pictures.
Buttons: Power, Menu, Volume + and -
It has also a Mic.
Thanks for your help!
-
09-05-2011 03:27 AM
# ADS
Circuit advertisement
-
-
I think that's the one! It looks a lot like mine.
Now mine stays in the boot image, saying "KinBo just do it"... I guess I need to find now the right firmware to load on a microSD card. Is that correct?
Where could I find it?
Thanks a lot!
-
Try pressing Power + one of the hardware keys, e.g. volume up or down or any other keys you have.
Purpose is to find how to boot into recovery, from there you should be able to press wipe data/cache.
Meaning you will do a factory reset and that should do the trick.
When you get into recovery, you may see a screen with a large ! mark.
Try pressing some buttons to move from the ! screen to another one which will have a selection menu.
Chun Ming Wong
If you own NEC Renesas EMMA Mobile EV2 based device, please join/watch this
thead, especially if you are a ROM developer.
Since my Renesas BSP/SDK thread I started
here is deleted, looks like I have no choice but to do it elsewhere.
I would like to help to build the community here but seems like I have to do my business elsewhere..
-
Thanks a lot for your response Eric.
I have actually been trying that for a while without success. What is the proper way? To have both power + another button pressed for some seconds, or keep this other button pressed and then go for the power button?
I can't find how to enter into recovery mode!
thanks again
-

Originally Posted by
amarant
To have both power + another button pressed for some seconds, or keep this other button pressed and then go for the power button?
Press both power and another button together to power up the unit.
Try keep both button pressed until u see something.

Originally Posted by
amarant
Buttons: Power, Menu, Volume + and -
My best guess is try Power + Menu
because that's what is commonly used.
Chun Ming Wong
If you own NEC Renesas EMMA Mobile EV2 based device, please join/watch this
thead, especially if you are a ROM developer.
Since my Renesas BSP/SDK thread I started
here is deleted, looks like I have no choice but to do it elsewhere.
I would like to help to build the community here but seems like I have to do my business elsewhere..
-
try reset...
Maybe a simple "reset" will do the trick.
Remember, there is a very tiny little hole on a side of the tablet.
(on mine, WM8650 7", it is on the "top" edege/side).
A small opened Paper-Clipp will do the job. Hold it down for SEVERAL seconds.
Good Luck ! :-)
-

Originally Posted by
hdmp4.com
Press both power and another button together to power up the unit.
Try keep both button pressed until u see something.
My best guess is try Power + Menu
because that's what is commonly used.
I tried them ALL for several seconds and nothing happens... I keep seeing that "KinBo just do it" thing...
-

Originally Posted by
gerotimm
Maybe a simple "reset" will do the trick.
Remember, there is a very tiny little hole on a side of the tablet.
(on mine, WM8650 7", it is on the "top" edege/side).
A small opened Paper-Clipp will do the job. Hold it down for SEVERAL seconds.
Good Luck ! :-)
Thanks gerotimm,
I have tried that too... and still the same.
-

Originally Posted by
amarant
I tried them ALL for several seconds and nothing happens... I keep seeing that "KinBo just do it" thing...
Are you sure you have continue to press on those keys all the time until you see something on the screen?
Pressing for several seconds is not enough, you need to PRESS it UNTIL you get into recovery mode. If you are not sure, try press it for 20 seconds before you release it.
If you connect this tablet to your computer via USB, does the computer see that your tablet is connected?
If so, you maybe able to use DDMS to see where/why the tablet stopped booting by turning on the tablet with the USB connected to the computer, provided USB debug driver is installed already.
However, it looks like it stopped at the bootloader which means DDMS won't work.
Chun Ming Wong
If you own NEC Renesas EMMA Mobile EV2 based device, please join/watch this
thead, especially if you are a ROM developer.
Since my Renesas BSP/SDK thread I started
here is deleted, looks like I have no choice but to do it elsewhere.
I would like to help to build the community here but seems like I have to do my business elsewhere..