Archos Arnova 10 Tablet stuck on error message- HELP

[lray3502]

I get an error message:The process android.process.acore has stopped unexpectely. Please try again"
Force Close

I click on Force Close and it just pops back up. I powered off, then it just comes back when I power back on. Help me get past this- not sure what stopped unexpecedly.

[Sponsors]

[tryandroid]

I received the same error message too on my new Arnova 10 unit, couldn't get rid off it from screen and couldn't use the unit. Need help from someone badly !!! Thank you in advance.

[tryandroid]

does anyone know if there is a way to reload the Arnova unit just like it came out from factory ? They should give you a CD for reloading the system.

[gurgle]

These units are so new. You should be able to return for exchange. And/or call Archos support. Visit Archos.com for details on how to get support.

[rugratsmomof4]

I have the same message. At firts I could push it and it would pop back up and now i can't even click force close - it's just stuck there.

[10 till 4]

ouch that sucks guys. Sounds like a bad batch. I would do as gurgle said and give archos a call

[michailo]

guys i have the same problem.the tablet stuck and i can't do anything.only logo appearence and nothing else.any ideas ?please help !!!

[cesar_cjx]

HI. I bought an arnova and a few days later it gets broken and stayed on "ARNOVA...ARNOVA" I could resolve it. If you even need help tell me and i could tell you how i did, althought i did not remember so good i would try

[carlos.almodovar]

I fought this error for about 4 days. After reading several forums I had enough info to correct the issue.

1. Download the firmware from the Arnova web site ARNOVA
2. Connect the tablet to the PC via USB, avoid using a USB Hub. Sometimes the Hub causes the PC not to recognize the tablet. The tablet will display as a Drive on your PC (Arnova 10)
3. Copy the .img file to the root of the tablet
4. While closing the message “android.process.acore” which pops up every second, I scroll down the top bar (hose icon on top left corner)
5. Select the Turn Off USB Storage
6. The tablet recognized the image file (step 3) and a message to update the firmware came up
7. Select install firmware

The table booted and installed the firmware. Now I have the tablet back in business.
Note: All this process was done while fighting the “android.process.acore” stopped unexpectedly, force close.

[billtrig68]

Confirmed. Re-installing the firmware solves the problem. Thanks.