First off, this is for the expierenced users only. I will not help you out with this, and I will not fix any bugs you post. I will take care of this as I see it and as the code on Canonical's side develops.
REPEAT: I WILL NOT CARE ABOUT YOUR BUGS
What does not work:
Boots!, thank you f69m here on xda
Step 1. Flash CM10.1 Beta 1 nvflash from the CM10.1 thread
Step 2. Boot into recovery, factory reset, then format data
Step 3. Flash Device specific flash -> https://docs.google.com/file/d/0B0oz...it?usp=sharing
Step 4. Flash Ubuntu File -> http://cdimages.ubuntu.com/ubuntu-to...blet-armhf.zip
Step 4a. Reboot
Step 5. Download Dev-Host - libc-2.15.so - The Ultimate Free File Hosting / File Sharing Service
Step 5a. adb push libc-2.15.so /data/ubuntu/lib/arm-linux-gnueabihf/libc-2.15.so
Step 6. adb reboot
Step 7. Run these commands
Find the "grouper" , move your cursor over to the 'g' and then press X, untill grouper is gone
Press ESC, then press I, and then type in "Streak7"
Do the same thing basically on "GRID_UNIT_PX=(adjust the number)"
Press ESC, then press : (<-colon)
Type in 'wq!" and press enter
type in "exit"
type in "reboot"
Set "export GRID_UNIT_PX=8" and "export QTWEBKIT_DPR=1.2"
You will need to keep this plugged in, as there is apps crashing and no power management feature yet, so battery burns quickly. The only thing you can do with it is interact with it via adb shell.