Help me fix my 10" crap
I need some who got this:
cpu model-armv6 processor
gpu vendor-Vivante corporation
gpu renderer-GC600 graphics engine
gpu version (openGL)-openGL ES-CM 1.1
ram size-437,9 mb
sd cart size-2638,6 mb
kernel 184.108.40.206-infoTM-root@ice (gcc version 4.4.0)#79 tue dec 27 20011
placed in the box-superpadIII, when you start you get te system "Android World"
The only way I can fix my tablet is to someone to send me an image of it's INTERNAL SD Card.
To make the image use HDDRawCopy. It will make an sector by sector copy of it's sd card so the file will be like 4GB(If you add it to archive it will reduce the file size to it's content). Then upload it anywhere possible and send me the link at my e-mail firstname.lastname@example.org
Thx, in advice !
04-10-2012 12:07 PM
How did you lose your data?
Have you attempted to do a factory restore? (front button + HOME + power), (front button + HOME)
Do you have your unit open? What is the model of the system board?
My data is not lost, just got bootloop after applying a script called V6 turbo charger or something.
Originally Posted by leeb
Tryed various combinations to get into any kind of recovery (Power On .. + Menu, + Home, Back, VOL -+ and etc. ) non of them is working. Tryed hooking a USB-USB cable - NOTHNIG.
Yes I have opened it :
CPU: Infotmic IMAPX210BM1-80
I can provide a picture of it but after rechargeing my camera battery.
This is the SD Card
Last edited by angelov86; 04-11-2012 at 11:04 AM.
UPDATE: I managed to find a way how to flash - use the WinHEX + aben.start.sector.001 method but couldnt find a right rom every rom I've tryed is stucked at bootloading.
<PWR><MENU> should conntect to IUW by USB...
I found a partially working rom - Android 2.2 version
Works faster (LOL)
Video playing seems the same
Only 2nd USB port is working
G sensor is wierd
Buttons Home and Vol - are switched
Maybe more I didnt test the whole thing.
So still in search for "Original" Android 2.3.3 with ANDROID WORLD boot animation witch comes with this unit.
Only flashing method working is with putting system.img uImage ramdisk.img updater on a TF card prepared with aben.start sector.001
Spew the details! Others might need the same thing and it might help them!
I used the 28th August: Kernel #136 rom from Flytouch3 P041 Official Firmware Updates
!Make Boot sector to EXTERNAL SD Card connected to your PC!
1. tools, disk tools, clone disk
2. choose file (aben.start sector.001) root of folder
3. Choose the sd card as your destination
4. start sector~ fill in 0 also make sure the directories are correct on left
5. After finish take out card and insert it back in
6. format the card to Fat32 (dont freak if your card is now gigs smaller, total size around 700mb)
7. extract android folder and copy the folder android on the sd card
Put the sd card in your pad's external TF Slot and turn it on.
It will take a while for the first boot, it may seems that you have bootloop but be pationed.
I'm still testing different roms to see if I get lucky.
But if someone have the same pad and have a good will to open it it will save a lot of people.
Last edited by angelov86; 04-13-2012 at 01:45 PM.
When I connect the USB - USB cable to any of the USB ports I cant power on the pad ... :S