Register Hello & Welcome to AndroidTablets.net, is this your first visit?

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1
    Administrator Achievements:
    100,000 Experience Points Veteran 50,000 Experience Points 25,000 Experience Points 10,000 Experience Points

    Member #
    795
    Join Date
    Jul 2010
    Location
    Canada
    Posts
    3,486
    Thanked
    432 times
    Device
    Asus Transformer TF300, Huwaei Ideos S7-104, HSG X5A, (Past APAD IMX515, APAD RK2808, RK2818 RT7)

    [ROM] Generic Rockchip 7" Android 1.5 Tablet RK2808a Firmware Guide

    Full specs and more pictures here

    Before attempting to flash any firmware onto your device, please verify that you have a matching device.
    There has been at least 5 mainboard revisions for this device. Externally, they look identical.


    Firmware flashing guide post 2

    Should look similar to this, and has a Rockchip processor. It will also be running Android 1.5:


    Utopia models
    Batch 1) 5V Input Voltage, Red Power Indicator Light, No Camera, Plastic Casing Only

    Batch 2) 5V Input Voltage, Red Power Indicator Light, Front-Facing Camera, Plastic or Metallic Casing
    Batch 3) 9V Input Voltage, Blue Power Indicator Light, Front-Facing Camera, Plastic Casing Only
    Downloadable firmwares
    Official release firmwares are available here:
    Downloads - apad-irobot - Project Hosting on Google Code
    Unlabeledreleases are for batch 2.

    Hybrid firmwares by Rogerbraun for batch 2: SlateDroid - The BIGGEST Android Tablet Forum on the Web!

    Hybrid firmware by me for batch 2: HybridKangXau
    Discuss here: http://www.androidtablets.net/forum/...ad-irobot.html

    Other models:
    Batch 2/3 intermediate Sample Batches) 5V Input Voltage, Blue Power Indicator Light, Front-Facing Camera, Plastic Casing, iWeb box

    Downloadable firmwares
    0630, firmware supplied by HiApad: BlueLED_RK2808a_SampleBatch_0630CN.zip - apad-irobot - Blue LED RK2808A Sample Batch Compatible Firmware 0630CN, NOT FOR BATCH 3 - Project Hosting on Google Code

    TabletStoreUK Hybrid firmwares types 1 and 2 (might work for others): Support - The Tablet Store

    Batch 3 from Moonse) 9V Input Voltage, Red Power Indicator Light, Front-Facing Camera, Metallic Casing Only

    I have seen multiple reports of this revision bricking upon flashing firmware. It is best NOT to flash anything if you have this revision.

    Anyways this is a mess. Apparently on some devices, shipping firmware is 0612, meaning that you can use batch 3 firmware.

    Downloadable firmwares
    0802, firmware kindly supplied by HiApad: Multiupload
    Huawei Ideos S7-104 on Singapore ROM, HSG X5A, RK2818 RT7, (Past: IMX515 APAD, RK2808 APAD)

    My written articles are licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License

    本人現在已比較小時間瀏覽此論壇。有關和此論壇的合作關係,請聯絡admin或4Nines。

  2. # ADS
    Ads
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

  3. #2
    Administrator Achievements:
    100,000 Experience Points Veteran 50,000 Experience Points 25,000 Experience Points 10,000 Experience Points

    Member #
    795
    Join Date
    Jul 2010
    Location
    Canada
    Posts
    3,486
    Thanked
    432 times
    Device
    Asus Transformer TF300, Huwaei Ideos S7-104, HSG X5A, (Past APAD IMX515, APAD RK2808, RK2818 RT7)
    How to for batch 1&2:
    Apad iRobot Firmware Update Tool (update.img) » HiApad

    Use the tool mentioned above with the downloaded .img file to flash.

    Here's a video of how it is done, using another tool. The method is similar.


    For 9v models, the firmware flash mode is different
    from Asure on Slatedroid

    1. Power switch off
    2. insert top USB to PC
    3. Power switch on, nothing happens, this is ok
    4. press & hold menu
    5. press & hold power
    6. keep pressing & holding both, the device is detected
    7. press the flash button in the rock usb flasher..

    It stays in loader mode, as long as you keep pressing the buttons.
    Huawei Ideos S7-104 on Singapore ROM, HSG X5A, RK2818 RT7, (Past: IMX515 APAD, RK2808 APAD)

    My written articles are licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License

    本人現在已比較小時間瀏覽此論壇。有關和此論壇的合作關係,請聯絡admin或4Nines。

  4. #3
    Junior Member Achievements:
    1 year registered 1,000 Experience Points 500 Experience Points 250 Experience Points 100 Experience Points

    Member #
    4905
    Join Date
    Oct 2010
    Location
    philippines
    Posts
    14
    Device
    epad MID701
    im using mid 701 android pad...with 9v input Voltage, Red Power Indicator Light, Front-Facing Camera..my android is v1.7.4 can you please help me re flash my unit?because my unit has no apps market installed and even i change the language onmy unit everytime i use it its still in chines language...please help me with this matter..tahnx!

  5. #4
    Junior Member Achievements:
    500 Experience Points 250 Experience Points Tagger Second Class 100 Experience Points 3 months registered

    Member #
    6584
    Join Date
    Nov 2010
    Location
    México
    Posts
    6
    Device
    M1 SmartPad
    Hello xaueious,

    I'm not asking for help just information. I just bought a Chinaleap M1 Smartpad with RK2808 firmware 1.5, rockchip version 1.2.7, kernel 2.6.25... I have been looking for a way to update the firmware to 2.2 or 2.1 but I don't know if that's a good idea... Do you suggest I should do the update?

    Thanks in Advance!

  6. #5
    Junior Member Achievements:
    500 Experience Points 250 Experience Points 100 Experience Points 3 months registered 31 days registered

    Member #
    16299
    Join Date
    Feb 2011
    Location
    Hong Kong
    Posts
    3
    Device
    ASK 711 SP
    Hi Guys, I have a ASK 711 SP also know as "Ask Internet Smart Pad" ( details here:ASK COMPUTER TECHNOLOGY CO. --MP3¡¢MP4¡¢MP5¡¢Mobile Phone¡¢Digital Photo Frame¡¢SD card¡¢USB Flash Disk¡¢Others ) its a Rockchip based tablet. (similar to the so called "smartPad" )

    2 questions,

    1) is it possible to remove all the Chinese bloatware/apps that comes with it, do I need to unroot uninstall the apps I don't want then re root, if so how do I do it with this model?

    2) I am stuck on android firmware (cupcake) 1.5, which is basically obsolete now as most of the new apps and games wont run on this outdated OS. Is there anyway to update this model to at least 1.6 or better still 2.2?

    Many thanks in advance (noobie tablet-er)

  7. #6
    Junior Member Achievements:
    250 Experience Points 100 Experience Points 3 months registered 31 days registered 7 days registered

    Member #
    17266
    Join Date
    Feb 2011
    Location
    Colombia
    Posts
    1
    Device
    Apad Moonse E7001

    My power Button Has broken also my pc wont recognize my Apad

    Hi Guys i have read all this post and others about how to fix and Apad even a Mp4 or Mp5 device... First of all thanks all for your support patient and time. Thanks a lot.


    The procedures that you mentions doesnt work to me .. ( Basically My Apad Isn’t recognize for my pc , even using the procedure of the second entry of xaueious) .. I have try this. .even the short circuit into the flash device but my apad doesn’t respond.


    This is my situation, i bought a Moonse Apad E7001 with red led and plastic wrap, i used this device very well for 4 moths , I just have little problems like an usb port #1 doesn’t work , when i plugged the hedphones the apad turn off , the apad also turned off if I pressed a little with my hand in the power button area, Well wasn’t perfect but still the apad worked


    i let it used for a week sort of .. and the moment when i decided turn on , my apad just got black and won't boot. In the pass i fixed this pushing very hard the power button,. but this method stop working anymore, desperate I just started pushing the power button too hard that i break it. . so i decided to open to fix the power button that I suspect was the problem


    After take time to search on internet ,… well I released very late (after open the device and remove the power button ), that wasn’t the power button problem or a hardware problem instead a software fail or firmware fail so like I said before I’ll tried the xaueious steps ( but just pressing the menu button, like the youtube video says ) , tried the short cort circuit,.. Nothing


    I’am actually trying a battery drain ( i have read this in another forum ) but the apad battery don’t uncharge, I guess cause I have a month trying this (let It keeping the power button on ), when a put a wire in the power button the apad turn’s black or make a tiny flash


    I posted a pictures of my apad device, please take a look.


    ImageShack® - Online Photo and Video Hosting apad opened with a little description

    ImageShack® - Online Photo and Video Hosting apad opened power button zone

    TinyURL.com - shorten that long URL into a tiny URL apad opened back screen

    ImageShack® - Online Photo and Video Hosting apad opened screen and body


    Thanks you all for your support or suggestion.

  8. #7
    Administrator Achievements:
    100,000 Experience Points Veteran 50,000 Experience Points 25,000 Experience Points 10,000 Experience Points

    Member #
    795
    Join Date
    Jul 2010
    Location
    Canada
    Posts
    3,486
    Thanked
    432 times
    Device
    Asus Transformer TF300, Huwaei Ideos S7-104, HSG X5A, (Past APAD IMX515, APAD RK2808, RK2818 RT7)
    I don't really how how to fix these things, but the reliability of these unbraded RK2808 tablets was terrible. I think the failure rate is over 50% by now.
    Huawei Ideos S7-104 on Singapore ROM, HSG X5A, RK2818 RT7, (Past: IMX515 APAD, RK2808 APAD)

    My written articles are licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License

    本人現在已比較小時間瀏覽此論壇。有關和此論壇的合作關係,請聯絡admin或4Nines。

  9. #8
    Junior Member Achievements:
    100 Experience Points 31 days registered 7 days registered

    Member #
    37275
    Join Date
    Jun 2011
    Posts
    2
    after flashing "Wi-Fi Mac Address is unavailable how do i solve this? my older version is Yuixing and after flashing it was Ruixing
    anyone here have the Yuixing FW

  10. #9
    Junior Member Achievements:
    100 Experience Points 7 days registered 31 days registered

    Member #
    48881
    Join Date
    Aug 2011
    Location
    Manila, Philippines
    Posts
    1
    Device
    Epad 9V 1.2

    Unhappy Epad query

    Dear Admin,

    I have an Epad 9v- 1.2 version. I want to upgrade it to the highest version that the market now has, can it be possible? I cannot play the videos correctly, It gets stuck at some point of time. I think the RAM cannot hold a lot of memory.

    If so, please e-mail me back at to_cath@yahoo.com. PLease send me the right files as well. I have a hard time finding the right link. There are so many and maybe I will be wrong.

    Waiting for your response.

  11. #10
    Junior Member
    Member #
    111798
    Join Date
    May 2012
    Location
    brazil
    Posts
    4
    Device
    irobot rk2808a
    Quote Originally Posted by xaueious View Post
    How to for batch 1&2:
    Apad iRobot Firmware Update Tool (update.img) » HiApad

    Use the tool mentioned above with the downloaded .img file to flash.

    Here's a video of how it is done, using another tool. The method is similar.


    For 9v models, the firmware flash mode is different
    from Asure on Slatedroid


    my irobot brikou, no longer recognizes the pc (usb) how can I do recognize it again? mine is a tablet irobot rk 2808A. silver (plastic) two usb, red light, I saw something about making a short on flash.
    if possible show me the correct firmware.
    Sorry my English because I am Brazilian. Thank you.


 
Page 1 of 2 1 2 LastLast

Ads:

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Replies: 17
    Last Post: 12-07-2011, 02:28 PM
  2. Rockchip 10 inch Android Tablet RK2808
    By cnadigtial in forum Rockchip RK2808 Tablets
    Replies: 2
    Last Post: 01-04-2011, 02:26 PM
  3. Generic Rockchip RK2808a 10" Tablet Specifications and Pictures
    By xaueious in forum Rockchip RK2808 Tablets
    Replies: 0
    Last Post: 08-11-2010, 07:30 PM
  4. Generic Rockchip RK2808a 7" Tablet Specifications and Pictures
    By xaueious in forum Rockchip RK2808 Tablets
    Replies: 0
    Last Post: 08-02-2010, 07:31 PM
  5. [ROM] HKX Custom Firmware for Batch 2 Rockchip 7" Apad iRobot - 0801
    By xaueious in forum Rockchip RK2808 Tablets
    Replies: 5
    Last Post: 08-02-2010, 04:34 PM

Search tags for this page

cmgm7

,

cost of a 7-inch android smart pad rockchip 1.2.7

,
firmware rk2906
,
firmware rockchip 2906
,
firmware tablet rockchip2928
,

generic tablet firmware

,
msi m727hc rock chip android tablet firmware
,
redpower android pc
,

rockchip 2906 firmware

,
rockchip rk2906 firmware
,

rockchip rk2906 firmware download

,
tablet cmgm7
Click on a term to search our sites for related topics.
Powered by vBulletin® Version 4.1.11
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
Android Tablets.net is not affiliated or associated with Google, Android Project or any of the device manufacturers listed on this site.
We are simply an enthusiast site.
All times are GMT -5. The time now is 11:23 PM.