How to manually update SYNET7LP/SYTABEX7 to Android 2.2 "Froyo"

[Michele31415]

Thank you very much for the wonderfully clear and complete directions. I used the OTG/USB method on my Sylvania SYNET7LP running 2.01 and hwver 11.2.0.6. It all worked perfectly. The only difference I found was that all the flashing stuff happened before I needed to press the Reset button. After I did that and powered on again, it simply booted normally, but now running 2.2. One other oddity - after restarting in 2.2, the WiFi wasn't working (claimed it couldn't find my LAN). Rebooting it once more fixed that problem. Downloaded FileExpert from SlideME, used that to sideload UniversalAndroot from my PC, rooted the thing, then was able to install Titanium Backup, restored all my apps from the SD card and we were good to go, ooh rah!

[Ads]

[jsevinsk]

I just bought a SYNET7LP-DS, and when I enter the hardware version in the URL below:

http://222.73.93.45/sysup.php?data=12.7.0.12&vcode=0

All I get back is "1". What am I doing wrong?

John

[ozarkxboxrepair]

i bricked my sylvania sytabex7-2 tablet
loades the os from sd card and when it was done it said remove sd and reboot
now it wont even power on
if anyone can help please email me at
chrismedley72@gmail.com

[laurita221]

i have a sylvania zynet7lp that doesnt mount sd card and doesnt read internal memory, coul i use this update for my tablet?

[laurita221]

hi, theres a way to do this without the usb port my zynet7lp has no port....

[ssme]

Caution: If your tablet was shipped with Android 2.2 DO NOT UPDATE! These update files are beta and months old.
This process was originally intended for the manual upgrade of 2.1 tablets.

So what should I do with a tablet that came with Android 2.2 out of the box, but now won't boot past the Disgo logo? Any help most appreciated.

[digpal_2002]

Hi i am trying to update my disgo 6000 with the Fryo 2.2 update but cannot download the ius file. I have tried to follow your link but it gives the following scrambelled text.

"WuI
ì
 =÷›½ê°WuI
ò
WuIó
Z
WuIMƒWuIÐWuI áë
êðŸåðŸå ðŸåðŸåðŸåðŸåðåàxV4xV4xV4xV4xV4xV4xV4l€ áÀãÓ€ãð)á ë|Ÿå|Ÿå
Ü@â0å0å ã €å€â
Páûÿÿðå„ ãîîîÀã
Àã Àã
ۋ
îPî€ãP
îÀ á·ë à áð á á á á¨Ðå.
ëÀÿ¿O"

please help.

Thank you to all the put this site together. I have successfully put my tablet back in working order. I the tablet with the specs below.
Model Number
SYTABEX7-2
Android Version
DG2.20
Hardware ID
11.2.3.1
Firmware
DG2.2.1-7a3.b5

I rooted it and renamed the Phone.apk file and the tablet didn't like that. I tried to reverse my changes but that didn't work.
- I downloaded the file below using the instructions at the top of the thread for my tablet the file below was downloaded
- http://222.73.93.45/update/11.2.3.1/....2.0_beta3.ius
- Used the IUW1.2 application to burn the file to a Micro SD card
- Turned off the tablet
- Inserted the Micro SD card
- Powered on the tablet and the image was burned to the device
Now when I verify the settings in About Device the information below is shown
Model Number
SYNET7LP
Android Version
DG2.20
Kernel version
2.6.32.9
neville@neville-desktop #17
Hardware ID
11.2.3.1
The Model number changed from SYTABEX7-2 to SYNET7LP.

Thanks again for all of knowledge on this site.

[BasB85]

Hi I'm trying to update a Disgo 6000 using disgo_12.2.0.5.1.4.ius file burned to a 8gb micro SD with IUW 1.2.
Followed the instructions and it was showing that it was installing the new software but when i rebooted the tablet nothing changed.. only looks like it had done a factory reset.

about system info:
Model Number: DISGO 6000
Sofware Version: 1.1
Kernel Version 2.6.32.9 judy@judy-pc #33

terminal info:
<5>Linux version 2.6.32.9 (judy@Judy-pc) (gcc version 4.3.3 (GCC) ) #33 Tue Nov 23 15:50:16 CST 2010
<4>CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
<4>CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>Machine: IMAPX200
<4>Ignoring unrecognised tag 0x00000000
<4>Ignoring unrecognised tag 0x54410008
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 65536
<7>free_area_init_node: node 0, pgdat c049e424, node_mem_map c0566000
<7> Normal zone: 512 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 65024 pages, LIFO batch:15
<4>CPU IMAPX200 (id 0x13ab2000)
<6>IMAP Clocks, (c) 2009 Infotm Micro Electronics
<6>iMAPx200: 67108864 bytes SDRAM reserved for memalloc at 0x4102d000
<4>IMAP Power Management, Copyright 2010 Infotm
<4>Built 1 zonelists in Zone order, mobility grouping off. Total pages: 65024
<5>Kernel command line: console=ttySAC3,115200 androidboot.mode=normal bmagic=0xeef07901 hwver=12.2.0.5
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 256MB = 256MB total
<5>Memory: 188288KB available (4224K code, 996K data, 140K init, 0K highmem)
<6>SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>Hierarchical RCU implementation.
<6>NR_IRQS:128
<4>Console: colour dummy device 80x30
<7>FOUND calc 114583, divisor 36
<6>console [ttySAC3] enabled
<6>Calibrating delay loop... 789.70 BogoMIPS (lpj=1974272)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>NET: Registered protocol family 16
<4>imapx200: Initialising architecture
<6>leaving imap_arch_init
<6>imapx200_dma_init: Registering DMA channels: ok!
<4>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6><6>imapx200_iic0 imapx200_iic0: i2c-1: IMAPX200 I2C adapter
<6><6>imapx200_iic1 imapx200_iic1: i2c-2: IMAPX200 I2C adapter
<6>Bluetooth: Core ver 2.15
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>Trying to unpack rootfs image as initramfs...
<6>Freeing initrd memory: 176K
<3>iMAP PWM Driver Init.
<6>ashmem: initialized
<6>ROMFS MTD (C) 2007 Red Hat, Inc.
<4>yaffs Nov 1 2010 14:17:57 Installing.
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>Registered led device: lcd-backlight
<6>Imap Framebuffer Driver Initialization Start!
<6>LCD TYPE :: will be initialized
<4>Console: switching to colour frame buffer device 100x30
<6>fb0: imapfb frame buffer device
<6>fb1: imapfb frame buffer device
<6>Set Lcd Backlight Brightness 75
<1>imap-fb, 0x1, 0x1, 0x3e
<6>Imap Framebuffer Driver Initialization OK!
<6>HDMI Probe to add i2c driver for HDMI device
<6>Device for HDMI will be Initializad
<6>Init HDMI device OK
<6>HDMI device add i2c driver OK!
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>imapx200-uart.0: imapx200_serial0 at MMIO 0x20e20000 (irq = 51) is a IMAPX200
<6>imapx200-uart.1: imapx200_serial1 at MMIO 0x20e21000 (irq = 23) is a IMAPX200
<6>imapx200-uart.2: imapx200_serial2 at MMIO 0x20e22000 (irq = 13) is a IMAPX200
<6>imapx200-uart.3: imapx200_serial3 at MMIO 0x20e23000 (irq = 33) is a IMAPX200
<6>brd: module loaded
<6>loop: module loaded
<6>iMAPx200 NAND MTD Driver (c) 2009,2014 InfoTM
<6>Method: IRQ(1), DMA(1), SECC(0), DEC.RDY, CRCD++
<6>NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit)
<6>Scanning device for bad blocks
<5>Creating 8 MTD partitions on "NAND 2GiB 3,3V 8-bit":
<5>0x000001800000-0x000001a00000 : "ramdisk"
<5>0x000001a00000-0x000002000000 : "kernel"
<5>0x000002800000-0x00000a800000 : "resv"
<5>0x000012800000-0x00001e800000 : "system"
<5>0x00001e800000-0x00005c000000 : "userdata"
<5>0x00005c000000-0x000060000000 : "cache"
<5>0x000060000000-0x00007ff00000 : "Local-disk"
<5>0x00007ff00000-0x000080000000 : "panic"
<4>[drivers/spi/spi_imapx200.c]:imapx200_spi_init!
<4>[drivers/spi/spi_imapx200.c]:imapx200_spi_probe!
<6>imapx200_ssim0 imapx200_ssim0.0: bitbang at c83e32c0
<4>[drivers/spi/spi_imapx200.c]:imapx200_spi_initialsetup!
<6>gmac-univ Ethernet Driver, V1.0
<0>eth0: gmac-univ at d0838000 IRQ 32 MAC: 00:1b:14:6c:07:f6
<6>PPP generic driver version 2.4.2
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<5>usbmon: debugfs is not available
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>imapx200_usbhost20 imapx200_usbhost20: Infotm Ehci Controller
<6>imapx200_usbhost20 imapx200_usbhost20: new USB bus registered, assigned bus number 1
<6>imapx200_usbhost20 imapx200_usbhost20: irq 44, io mem 0x20c81000
<6>imapx200_usbhost20 imapx200_usbhost20: USB 2.0 started, EHCI 1.00
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 4 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>imapx200_usbhost11 imapx200_usbhost11: Infotm Ohci Controller
<6>imapx200_usbhost11 imapx200_usbhost11: new USB bus registered, assigned bus number 2
<6>imapx200_usbhost11 imapx200_usbhost11: irq 26, io mem 0x20c80000
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 4 ports detected
<6>usbcore: registered new interface driver cdc_wdm
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>usbserial: USB Serial Driver core
<6>USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>option: v0.7.2:USB Driver for GSM modems
<6>mice: PS/2 mouse device common for all mice
<6>---Headphone is not alive!
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>ads7846 spi0.0: touchscreen, irq 5
<6>input: ADS7846 Touchscreen as /devices/platform/imapx200_ssim0.0/spi0.0/input/input1
<7>~~~~~~~~~~~~~~~~~~ power:655, power:653 ,power:653, power:652, power:656~~~~~~~~~~~~~~~~~~~~~~
<6>iMAPx200 RTC, (c) 2009, 2014 InfoTM Microelctronics Co., Ltd
<6>using rtc device, imap, for alarms
<6>imapx200_rtc imapx200_rtc: rtc core: registered imap as rtc0
<6>i2c /dev entries driver
<6>Linux video capture interface: v2.00
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v0.1.0)
<6>get CMDLine console=ttySAC3,115200 androidboot.mode=normal bmagic=0xeef07901 hwver=12.2.0.5
<4>[camif]-:flag_phy_addr = 4801d000
<6>Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>usbcore: registered new interface driver btusb
<6>[SDHCI0]:infoTM sdhci host driver init.
<3>[sdhci]-SDIO MAX CLOCK RATE = 96000000
<6>Registered led device: mmc0::
<6>mmc0: SDHCI controller on info_sdi0 [imapx200_sdi0.0] using ADMA
<3>wacom driver registered
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>logger: created 64K log 'log_system'
<6>Advanced Linux Sound Architecture Driver Version 1.0.21.
<6>WM8987: Audio Codec Driver v0.12
<6>asoc: WM8987 <-> imapx200-i2s mapping ok
<6>usb 1-1: new high speed USB device using imapx200_usbhost20 and address 2
<6>mmc0: new high speed SDHC card at address e624
<6>mmcblk0: mmc0:e624 SU16G 14.8 GiB
<6> mmcblk0: p1
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>Proc-FS interface for audio codec
<6>ALSA device list:
<6> #0: imapx200 (WM8987)
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>Bluetooth: L2CAP ver 2.14
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO (Voice Link) ver 0.6
<6>Bluetooth: SCO socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: BNEP filters: protocol multicast
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<6>imapx200_rtc imapx200_rtc: setting system clock to 2013-03-24 10:58:38 UTC (1364122718)
<6>Freeing init memory: 140K
<7>FOUND calc 114583, divisor 36
<7>FOUND calc 114583, divisor 36
<6>yaffs: dev is 32505859 name is "mtdblock3"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.3, "mtdblock3"
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 1
<6>yaffs: dev is 32505860 name is "mtdblock4"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 1
<6>yaffs: dev is 32505861 name is "mtdblock5"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 1
<6>yaffs: dev is 32505862 name is "mtdblock6"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.6, "mtdblock6"
<4>block 168 is bad
<4>block 169 is bad
<4>block 170 is bad
<4>block 171 is bad
<4>block 172 is bad
<4>block 173 is bad
<4>block 174 is bad
<4>block 175 is bad
<4>block 176 is bad
<4>block 177 is bad
<7>FOUND calc 114583, divisor 36
<3>init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<3>init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<7>[OPS DEBUG] Get into asysops device driver
<7>[OPS DEBUG] Open asysops device node OK
<7>[OPS DEBUG] Get asysops ioctl
<7>[OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[OPS DEBUG] Normal exit asysops ioctl, 0
<7>[OPS DEBUG] Get into asysops device driver
<7>[OPS DEBUG] Open asysops device node OK
<7>[OPS DEBUG] Get asysops ioctl
<7>[OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[OPS DEBUG] Normal exit asysops ioctl, 0
<7>[OPS DEBUG] Get into asysops device driver
<7>[OPS DEBUG] Open asysops device node OK
<7>[OPS DEBUG] Get asysops ioctl
<7>[OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[OPS DEBUG] Normal exit asysops ioctl, 0
<7>[OPS DEBUG] Get into asysops device driver
<7>[OPS DEBUG] Open asysops device node OK
<7>[OPS DEBUG] Get asysops ioctl
<7>[OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[OPS DEBUG] Normal exit asysops ioctl, 0
<7>[OPS DEBUG] Get into asysops device driver
<7>[OPS DEBUG] Open asysops device node OK
<7>[OPS DEBUG] Get asysops ioctl
<7>[OPS DEBUG] ASYSOPS_CMD_GET_SHMEM
<7>[OPS DEBUG] Normal exit asysops ioctl, 0
<6>warning: `dhcpcd' uses 32-bit capabilities (legacy support in use)
<6>imapx200_mac imapx200_mac: phy write timed out
<6>eth0: link down
<6>galcore galcore: GPU(v2.5.3) power is ready.
<7>*********imap_add_timer!
<7>~~~~~~~~~~~~~~~~~~ power:649, power:648 ,power:650, power:649, power:649~~~~~~~~~~~~~~~~~~~~~~
<4>Entered imapx200_hifi_hw_params, channel = 2
<6>CPU_DAI name is imapx200-i2s
<4>freq is 16934400
<4>i2s clkdiv = 45, cdclkdiv = 2
<6>----params is 44100
<4>state write is 0x22
<4>valrate is not equal the value of the srate
<7>----src_addr0 is 4817c000, src_addr1 is 4817d000
<6>---------wm8987_mute!
<6>---congratulation, you can listen to the music!
<7>*********imap_add_timer!
<7>~~~~~~~~~~~~~~~~~~ power:649, power:648 ,power:647, power:647, power:647~~~~~~~~~~~~~~~~~~~~~~
<7>*********imap_add_timer!
<7>~~~~~~~~~~~~~~~~~~ power:654, power:651 ,power:653, power:651, power:653~~~~~~~~~~~~~~~~~~~~~~
<7>*********imap_add_timer!
<7>~~~~~~~~~~~~~~~~~~ power:655, power:653 ,power:654, power:651, power:655~~~~~~~~~~~~~~~~~~~~~~
<7>*********imap_add_timer!
<7>~~~~~~~~~~~~~~~~~~ power:651, power:653 ,power:651, power:651, power:653~~~~~~~~~~~~~~~~~~~~~~
<7>[drivers/input/touchscreen/ads7846.c]:ads7846_irq
<7><<<<<<<<<<<<<<<<<< EINT5 = 5 >>>>>>>>>>>>>>>>>>>>
<7>0x1
<7>pendown state:0x1
<7>>>>>>Enter pendown state
<7>****** ads7846_timer!
<7>pendown state:0x0
<7>[drivers/input/touchscreen/ads7846.c]:ads7846_irq
<7><<<<<<<<<<<<<<<<<< EINT5 = 5 >>>>>>>>>>>>>>>>>>>>
<7>0x1
<7>pendown state:0x0
<7>[drivers/input/touchscreen/ads7846.c]:ads7846_irq
<7><<<<<<<<<<<<<<<<<< EINT5 = 5 >>>>>>>>>>>>>>>>>>>>
<7>0x1
<7>pendown state:0x1
<7>>>>>>Enter pendown state
<7>****** ads7846_timer!
<7>pendown state:0x0
<7>[drivers/input/touchscreen/ads7846.c]:ads7846_irq
<7><<<<<<<<<<<<<<<<<< EINT5 = 5 >>>>>>>>>>>>>>>>>>>>
<7>0x1
<7>pendown state:0x0
<7>[drivers/input/touchscreen/ads7846.c]:ads7846_irq
<7><<<<<<<<<<<<<<<<<< EINT5 = 5 >>>>>>>>>>>>>>>>>>>>

Am I doing anything wrong? Hope someone can help

[chrisshort]

just wondering if anyone has a link to the firmware for 11.2.0.6.
i have tried the link provided in this thread which is http://222.73.93.45/sysup.php?data=11.2.0.6&vcode=0 but all it returns is a page displaying 1?

If anyone could point me in the direction of a working link i'd be eternally grateful.
Thanks.

[mechanic100]

does anyone know where i can get this file from please disgo_12.2.0.5.1.4.ius or do i have to download it from somewhere.allen