Sylvania - micro SD issues

[Lcatanag]

Got my son a Sylvania SYNET7LP for Xmas.
Got the downloading worked out. Having issues with tablet seeing the 8G Micro SD card I installed.
Are there any special instructions to get it working out there? Sylvania website is not very helpful.
Or point me in the right direct.

Thanks in advance to all those that responds.

[Sponsors]

[Bugeyz]

All my experience has been: make sure the phone /tablet is off, insert the memory card, then turn on the machine. It should find it automatically.

Sent from my Transformer Prime TF201 using Android Tablet Forum

[KSWTeach]

I'm having similar problems with my new Mini Tablet. I can't get the micro SD card to stay in the slot. It won't click in place, like the booklet says it will. Not sure what I'm doing wrong. I don't have a lot of experience with these things. Sylvania's little booklet doesn't really help much. (For a lot of things! I'm learning more by exploring!) Anyway...not sure what to do. I wanted to put things onto the Micro SD, rather than filling up the main memory. Sigh...

[Spider]

I can't get the micro SD card to stay in the slot. It won't click in place, like the booklet says it will.

Try pushing it in a little farther than you have been. That's usually the solution to the problem you're having.

[DamnThoseWiffyDogs]

Let's see...

- According to this post, Digital Gadgets is stating that SDHC cards will not work with the SYNET7LP-DS model, but then this post states that a (Unknown manufacturer) 16GB SDHC card was tested and worked with the device.

- This post states that the card needs to be formatted in FAT32.

- This post suggets that you need to go into the settings for the device to mount the card.

- This was under a thread for the SYTAB7MX and the poster only mentions using it in a Nook, but they suggest that only class 4 and up cards are used as class 2 are known to cause issues.


I'm currently having the same issues with my SYNET7LP-DS not seeing any micro SD cards. The following cards are what all I have tried so far:

- Team 32GB SDHC Class 4 (This was slow-formatted in FAT32 on the first try, then formatted on my phone on the second try.)
- SanDisk 16GB SDHC Class 2 (This was the card in my Motorola Droid A855.)
- Kington 1GB SD (This was quick-formatted in FAT32.)
- SanDisk 1GB SD

It recognizes that there IS a card in the card slot because it shows up in the settings under "SD card & phone storage" as "SD2" and when I remove the card from the slot the notification message comes up telling me to put in another card. It's just unable to figure out the size of the card.

[normawar]

Has anyone figured out how to correct this problem, I can not mount the SD card and now I can not even run an Update on the tablet because it says it is out of memory?

[mysticus]

My Sylvania mini tablet ate my micro SD card! I inserted the micro sd card that was sold to me with my tablet and cannot remove it!! How in the world can I get it out? I can hear it rattle whenever I move the tablet you would think it would fall out! it hasnt and I cannot remove it is there anyway to remove this thing without killing my tablet the poor thing is not even a week old!

[DamnThoseWiffyDogs]

Has anyone figured out how to correct this problem, I can not mount the SD card and now I can not even run an Update on the tablet because it says it is out of memory?

No, I ended up swapping out my tablet at the store I purchased it from. They luckily had one left. I told them what the defect was and they seemed fine with taking it back. (Probably lots of others have returned theirs for the same reason.) I just tried out this new tablet today and it is able to see my Team 32GB SDHC Class 4 microSD card.

You might just have to return it or try to get an RMA from Digital Gadgets if either is possible.

My Sylvania mini tablet ate my micro SD card! I inserted the micro sd card that was sold to me with my tablet and cannot remove it!! How in the world can I get it out? I can hear it rattle whenever I move the tablet you would think it would fall out! it hasnt and I cannot remove it is there anyway to remove this thing without killing my tablet the poor thing is not even a week old!

Ah, that sucks. I noticed that there is a small space above the actual microSD dock that you can accidentally put your card into. (I almost did it myself.) You'll probably have to open up the tablet. I know there are two screws on the top of the tablet (They are under those little shiny pieces in the frame.), but I have no idea where the rest are. They might be under the "face plate" on the bottom.

[BigDsubF]

I just had the same problem- card slipped in above actual slot- flip unit over a shake it till the edge of the card slips a little out of the area above the slot then grab the corner with a pair of tweezers and remove.

[jacksonliam]

I managed to get my tablet to recognise an SD like this:
-Tablet off
-Insert SD
-Connect tablet to PC
-Tablet on
-Unplug tablet from PC

It worked fine after that...