Zenithink ZT180 Support Links

[xaueious]

Zenithink Firmware Downloads and Howtos:
Direct from zenithink
Through Vendor: Zenithink.us
Elonex: http://www.elonex.com/

Do not flash firmware that was not intended for your device

Discussion on unofficial user Chinese forums: http://zenithink.com.nu

(Depreciated)
Firmware flash tool:
USBburntool(1).rar-USBburntool.rar

Firmware flash instructions (from xda):

Howto Flash the device:

Shutdown the Pad.
Then Press The Button on the Right site in front of the pad (there is only one?) and the Power Button at the Same Time.
Then the device will be flashable and the light will be blue i think.
Then you Put the USB-Cable in, install the driver which is also in the package.
Now you can open burntool.

Device10 should be green.
Now jo goto Settings, and set uboot, kernel,sys-dat, udat

uboot: u-boot.img
linux-kernel:zImage_cui
linux-sys:system.img
linux-udat:userdata.img

Press the FIRST button from the left site to confirm the settings

Now press Start and the device should be starting to flash....

However sometimes the board hangs after flashing and will not start directly dont worry. If everything doesnt help, do a reset.

[Sponsors]

[xaueious]

Zenithink ROM 0818 released: http://www.dbank.com/download.action...Njk0NDM=&rnd=4

[christim]

All of the links to files in the first two posts of this thread are dead ones, or I can't get to here from here.

[arnoldliao]

new firmware is at http://www.toydeka.com/downloads/ZT-180_1020fw.rar as of Nov 14th, 2010

[fooster]

reupload your dbank link ;please

[xaueious]

Get it from Zenithink instead

[Mongy]

I got the 1030 update from the Zenithink site, my current is 0929, can I jump right up to that update and get everything current or do I need all the others first?

[hoben02]

yes, you can bypass the 1020. if you have not updated before there maybe some software missing from the package like the burntool and some of the unix files get those from the 1020 package

[Mongy]

yes, you can bypass the 1020. if you have not updated before there maybe some software missing from the package like the burntool and some of the unix files get those from the 1020 package

Ok, cool, I downloaded the 1020 package from the .us zenithink site, I think Im good

Man, this pad is awesome now, cant wait for the firmware update!

[hoben02]

when you run the update i could not get the usb driver connection working on windows 7(upgrade from windows vista), but it worked on windows xp service pack 2. also you do realize that you have to have the usb to mini-b port (otg) connection on the tablet