adding a SD slot to the flytouch

jakxxx

Member
Apr 21, 2011
8
0
I have been looking for a 32 gig micro sd. They are way over priced. I have a few standard sd slots laying around. (at least half the price of a micro and I can buy them locally) Does anyone know if it is possible to wire in a regular sd card slot and use it? I would like to try it but was hoping to get some info. I have done plenty of mods in the past so I'm not worried about the dangers.
 

uplade3

Super Moderator
Staff member
Apr 29, 2011
751
62
Seeing as how the MicroSD slot uses the same wire printout, it could be possible. Just buy a slot and then wire it to the board in the same order that the Micro is soldered.
 

jakxxx

Member
Apr 21, 2011
8
0
That is what I was thinking. Do you think it would be possible to use both at the same time? Or would I be able to use 1 and not the other?
 

uplade3

Super Moderator
Staff member
Apr 29, 2011
751
62
Most likely you would have to lose one over the other. But you could always buy a cheap cheap adapter to adapt the SD to Micro.
 

MrHabaki

Member
Oct 25, 2010
33
1
Okay, internal solution might be best, but you can easily use a sd card within an usb sdcard reader with your flytouch...
 
Top