FlyTouch 5 SUPER EASY ROOT INSTRUCTIONS!

Discussion in 'Android Tablet Hacking' started by KD271158, Feb 16, 2012.

  1. KD271158

    KD271158 Member

    Joined:
    Feb 3, 2012
    Messages:
    21
    Likes Received:
    4
    Trophy Points:
    62
    Location:
    Thunder Bay,Ontario,Canada
    Tablet / Device:
    Too many to list
    FLYTOUCH 5 SUPER EASY ROOT INSTRUCTIONS
    ( I used Windows XP x86/32bit System )
    Rooting takes about 5 min or less
    First of all Thanks!, for the Original Vimicro v1 Internal Drive Image and the V2 Update. Secondly Thanks!, to the Original uploader of these Command lines.
    Once I restored and rooted the english v1 image the v2 update loaded in english with all my settings intact .All I had to do was reroot. .
    I tried using the step by step instructions with windows 7 64bit system for 14 1/2 hours and had no luck, so I decided to reload a drive with XP and give this a shot and...BINGO! Roota...Voota...Zoot!
    Download this first by clicking here on this link: SOC.rar (SOC rar download)
    When it's downloaded, extract the "SOC rar file" to your hard drive root on your computer , it's usually C:\
    However yours may be different so just substitute the letter for your own . The original poster used a forward slash after the drive letter which wasn't working for me so, as you see I've used a backslash instead and well....what more can I say but...It works!
    Prepare your FlyTouch 5 V10 Android Cortex A8 Tablet PC
    1. Turn on your tablet
    , click Settings > Applications > Development and make sure USB Debugging is on then turn the tablet off.

    2. Plug in the power cord to the tablet.
    3. Connect one end of the male/male USB cable to the top usb port on the tablet.
    4. Connect the other end to a USB port on the computer.
    5. Turn tablet on.
    ON YOUR COMPUTER:
    Open a "Command Prompt Terminal" Usually found in , "Start> All programs>Accessories" in Windows Operating Systems.

    In "cmd prompt terminal" , type the following,or just copy and paste like I did, pressing " enter" after each line.
    cd C:\
    cd SOC
    cd ADB
    Then once you've done this, proceed with the root steps .(Type or copy and paste,works both ways)
    as follows , remember to press enter after each line!
    ADB root
    ADB shell mount -o remount,rw /system
    ADB push su-3.0.3.2-efghi-signed /system/xbin/su
    ADB shell chown 0.0 /system/xbin/su
    ADB shell chmod 04755 /system/xbin/su
    ADB shell mount -o remount,ro /system
    ADB install -r Superuser-3.0.7-efghi-signed.apk
    ADB shell mount -o remount,rw /system
    ADB push su-3.0.3.2-efghi-signed /bin/su
    ADB shell chown 0.0 /bin/su
    ADB shell chmod 04755 /bin/su
     
    My TAB:
    iBex FlyTouch5 V10
    Android 2.3 Cortex A8 APad
    :cool:
     
  2. Rocky220

    Rocky220 Member

    Joined:
    Jan 4, 2012
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    60
    Location:
    Montreal, Laval Quebec
    Tablet / Device:
    Vimicro Mid 7 inch, Nexus one and Wondermedia Mid 7
    Perfect! Been Trying to root my Vimicor MID 7 Chinese Pad for sometime, the above from KD271158 done the Trick, had to do it twice for some reason, But at least it's rooted

    I have 2 other pads and they were very easy to root but not the Vimicor, Also thank the original up loader of the command lines, Thanks
     
  3. knocky

    knocky Member

    Joined:
    Jul 22, 2012
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    60
    Location:
    Greece
    Tablet / Device:
    Flytouch 8
    Hello KD271158 do you know if with this we can root the new Flytouch 8 ?
     
  4. mdj

    mdj Member

    Joined:
    Jul 14, 2012
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    60
    Location:
    United States
    Tablet / Device:
    Superpad 6, generic_vortex, Android 4.0.3
    What would I need to change for this method to work for the Superpad 6?TIONS
    [/B][/U]( I used Windows XP x86/32bit System )
    [/SIZE]Rooting takes about 5 min or less
    First of all Thanks!, for the Original Vimicro v1 Internal Drive Image and the V2 Update. Secondly Thanks!, to the Original uploader of these Command lines.
    Once I restored and rooted the english v1 image the v2 update loaded in english with all my settings intact .All I had to do was reroot. .
    I tried using the step by step instructions with windows 7 64bit system for 14 1/2 hours and had no luck, so I decided to reload a drive with XP and give this a shot and...BINGO! Roota...Voota...Zoot!
    Download this first by clicking here on this link: SOC.rar (SOC rar download)
    When it's downloaded, extract the "SOC rar file" to your hard drive root on your computer , it's usually C:\
    However yours may be different so just substitute the letter for your own . The original poster used a forward slash after the drive letter which wasn't working for me so, as you see I've used a backslash instead and well....what more can I say but...It works!
    Prepare your FlyTouch 5 V10 Android Cortex A8 Tablet PC
    1. Turn on your tablet
    , click Settings > Applications > Development and make sure USB Debugging is on then turn the tablet off.

    2. Plug in the power cord to the tablet.
    3. Connect one end of the male/male USB cable to the top usb port on the tablet.
    4. Connect the other end to a USB port on the computer.
    5. Turn tablet on.
    ON YOUR COMPUTER:
    Open a "Command Prompt Terminal" Usually found in , "Start> All programs>Accessories" in Windows Operating Systems.

    In "cmd prompt terminal" , type the following,or just copy and paste like I did, pressing " enter" after each line.
    cd C:\
    cd SOC
    cd ADB
    Then once you've done this, proceed with the root steps .(Type or copy and paste,works both ways)
    as follows , remember to press enter after each line!
    ADB root
    ADB shell mount -o remount,rw /system
    ADB push su-3.0.3.2-efghi-signed /system/xbin/su
    ADB shell chown 0.0 /system/xbin/su
    ADB shell chmod 04755 /system/xbin/su
    ADB shell mount -o remount,ro /system
    ADB install -r Superuser-3.0.7-efghi-signed.apk
    ADB shell mount -o remount,rw /system
    ADB push su-3.0.3.2-efghi-signed /bin/su
    ADB shell chown 0.0 /bin/su
    ADB shell chmod 04755 /bin/su
     
    My TAB:
    iBex FlyTouch5 V10
    Android 2.3 Cortex A8 APad
    :cool:[/QUOTE]

    Thank you so much for this post. What would I need to change for this to work on the Superpad VI (6), 10.1 inch, with Android 4.0.3?
     

Share This Page

Search tags for this page

cortex a8 root

,
cortex-a8 android root
,

easy root flytouch android

,
flytouch 10vc operating system download
,
flytouch 10vc root
,
flytouch 5
,
flytouch 5 apk
,
flytouch 5 vimicro specifications
,
flytouch tablet cortex a8
,
how to apk downloaded for flytouch 5 tab
,

how to root vimicro tablet

,
how to rooted cortex tablet
,

root cortex a8 device

,
root flytouch 5
,

root flytouch 7

,
root for vmicro
,

root vimicro mid

,

root vimicro tablet

,
rootear tablet flytouch
,

vimicro root