Background: I flashed my tablet with a ROM that was made for Enjoy 10", not Enjoy 10" plus. Prior to me foolishly flashing, I was able to get into the 'flashing mode' by holding Power+VolUp+Reset. Here's the official link for my Enjoy 10" Plus tablet Here's the ROM's thread that screwed me My old thead on xda that I've given up on Problem: Tablet's buttons no longer respond or light up. Only Power and Reset buttons responds. Tablet immediately turns off after 2 seconds after powering up. (More detailed: I press power for a second, it vibrates, logo appears, logo disappears, black screen for 2 seconds, tablet turns off). I'm able to keep it on ONLY IF I hold Power+Reset buttons forever. (More detailed: I press power + reset, black screen [no logo] and will stay black) Stuff I did: On Windows 7 x64 w/ flashing drivers installed, normal usb drivers installed, Android SDK installed: Plug in tablet using USB, hold Power+Reset. Result: https://i.minus.com/iBXgLb8AZ9wu2.png On Ubuntu 12.10 x64 w/ Android SDK : $ adb devices: shows nothing. $ lsusb -v: spilot@spilot-pc:~$ lsusb -v Bus 007 Device 003: ID 04b3:310d IBM Corp. Cou - Pastebin.com $ tail -f /var/log/syslog: Feb 20 22:04:42 spilot-pc kernel: [ 2110.204033] usb 3-1: new full-speed USB dev - Pastebin.com Note: All I know is written over here, I know nothing more. If you've got any suggestion or a tool that I might try, please post about it. I'm kind of desperate. Or is there really no way out and I have to go to a shop? I'm going to sleep for now, I'll check in tomorrow. Thanks in advance.