¿How can update of my tablet?

final20

Member
Mar 13, 2011
2
1
Hi, yesterday i buy my fist tablet, and I had problems with android market, after reading a bit in your forum, and i need upgrade my firmware, but, I am very cautious, in firmware topics I am very careful to firmware issues, so before doing anything, I have some questions:

¿how can make backup of my actual firmware?
¿what firmware should use? I want better performance and, android market.
¿Is there android 2.1 for my dev?

Well there are my cuestions, i dont know what are the model of my device, so let images from my tablet and android info.

BCKcC.jpg

aHa74.jpg

AS4fN.jpg


Android info:
Firmware: 1.6
Kernel: 2.6.29-00236-g4f8dbbb-dirty
Build: WTM2.1.2_105

Well it's all thanks for reading and your answers.


P.D. Sry for my bad english, is not my native languaje...
 

RomanticEvil

Member
Oct 26, 2010
245
22
Seems like a known tablet to me! WMT 2.1.2 SZMCE12, have a few questions:

1. What's the device's LED color when it's turned on ? Blue or Green ?
2. Does the tablet vibrate at start up ?
3. Does the tablet have a green or black audio port ?
4. Which connector has your tablet, 24 pins or 30 pins ?
5. Which WMT version is it ? You can find that rightunder when booting or in settings\about device.
6. What is your actual RAM Size ? 128MB or 256MB ? To find that out, use e.g. Advanced Task Killer to see what's free. Don't rely on the about settings dialog as this might be manipulated.
7. What did the box label say ? MID / iRobot / ePad / aPad / SmartPad etc.

Well I'm almost certain I got a ROM mod for you.
 

delboy1966

Member
Mar 15, 2011
2
1
Hi
I just read this post because I was looking for an update also, it appears I have a similar tablet.
So if I can hijack this thread and answer your questions, hopefully you have a ROM that would be OK for me:

1. LED is green
2. Yes it vibrates
3. Black audio port
4. Unsure about the connector??
5. WMT2.1.2_105
6. 256MB
7. MID on the box.

Thanks in advanced.

Tony
 

final20

Member
Mar 13, 2011
2
1
Seems like a known tablet to me! WMT 2.1.2 SZMCE12, have a few questions:

1. What's the device's LED color when it's turned on ? Blue or Green ?
2. Does the tablet vibrate at start up ?
3. Does the tablet have a green or black audio port ?
4. Which connector has your tablet, 24 pins or 30 pins ?
5. Which WMT version is it ? You can find that rightunder when booting or in settings\about device.
6. What is your actual RAM Size ? 128MB or 256MB ? To find that out, use e.g. Advanced Task Killer to see what's free. Don't rely on the about settings dialog as this might be manipulated.
7. What did the box label say ? MID / iRobot / ePad / aPad / SmartPad etc.

Well I'm almost certain I got a ROM mod for you.

1. Device LED color is Green when it's turned on, red when charging
2. no, don't vibrate at startup
3. as the picture black Audio Port
4. 24 pins
5. WMT2.1.2_105
6. 256mb Ram reported by Android System Info, but advanced taskiller reports 106 available...
7. The box say's MID in black letters.

Thanks for your answers!

added pictures of the MID box...
ZTRhv.jpg

KRzNw.jpg


P.D. sorry for taking to answer I have been busy this days!
Best regards Final
 
Last edited:

nvtellan

Member
Jul 18, 2011
6
0
Hello. I also need help/recommendation in upgrading/improving the performance of my tablet (with details below).

The box say's its a MID
7" screen
LED color is Green
Vibrates on Start-up
Ports/interfaces are black

model: generic
ram: 256MB
kernel: 2.6.29-00236-g4f8dbbb-dirty
firmware: 1.6
build: WMT2.1_88

Internal Device Storage
Total Space: 2GB
System Space - Total Space: 1GB
LocalDisk :Total Space: 1.07GB

Thanks in advance.
 
Top