How to Install ClockworkMod Recovery on the Viewsonic gTablet

Discussion in 'Viewsonic gTablet' started by cometome1991, Sep 21, 2012.

  1. cometome1991

    cometome1991 Member

    Sep 21, 2012
    Likes Received:
    Trophy Points:
    The Viewsonic gTablet is a great Android tablet with its NVidia Tegra 2 dual-core CPU, an expansive 10.1 inch touchscreen display and a 3650 mAh battery to last longer than some other tablets. What’s sad though is the device comes with Android 2.2 Froyo – for those who know their Android version numbers, we are currently at Android 4.1 Jelly Bean, a version which can be seen running perfectly on devices far less capable than the gTablet. With no official support though, it’s time to turn to the devs for custom ROMs and they have delivered! Of course, you’ll need to root and install ClockworkMod Recovery on any device before its ready to accept custom ROMs, and this guide below will show you how to install ClockworkMod Recovery on the Viewsonic gTablet.

    What You Need?

    1. This procedure will wipe all your apps, data and settings (but it will NOT touch your SD cards, so don’t worry about those). Backup your Apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc. This [Android backup guide] would help you.
    2. Make sure that your device is fully charged or at least up to 75% before you begin.
    3. Back up everything you feel is important before you start with this procedure.
    4. The Viewsonic gTablet is known to have two bootloader versions – 1.1 and 1.2. Make sure you choose the right zip file in the next section as choosing the incorrect one can brick your device. To know what version you have on your device running stock OS, go to Menu > Settings > About Tablet > Tap UI Version; the firmware version should either start with 1.1 or 1.2 and this will be the zip file you will be downloading.
    5. This guide will assume that you have the 1.2 bootloader and will be using the relevant files for this version; if you are on 1.1, follow the same procedure but substitute the necessary files to avoid bricking your device.
    6. [] (for devices running 1.2 bootloader)
    7. [] (for devices running 1.1 bootloader)


    1. Extract to a folder on your desktop. This folder should contain a zip file named and a folder called recovery.
    2. Connect your device to your PC and copy both the recovery folder and to the root of your internal SD card (not into any folders).
    3. Disconnect and turn off your device.
    4. Press and hold the Volume Up and Power buttons until you see “Recovery key detected” flash on the screen.
    5. The file will now start flashing automatically, installing ClockworkMod Recovery on your device, and reboot.

    That’s it! You are done installing ClockworkMod Recovery on the gTablet.

    Source: Awesome Android Tips

Share This Page

Search tags for this page
cwm recovery for tablet
download clockworkmod for viewsonic g-tablet

download cwm recovery for g tab jelly bean

gtablet recovery not working
how to change clockworkmod on gtablet
install cloockworkmod viewsonic gtablet