Issues with micro sdhc card in Superpad

Discussion in 'Gome Flytouch II' started by trob613, Jan 16, 2012.

  1. trob613

    trob613 Member

    Joined:
    Jan 16, 2012
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    60
    Location:
    Murrieta CA
    Tablet / Device:
    Superpad 1
    Hi All,

    I have the Superpad with 2 TF slots, Android 2.2 (Superpad 1?). Anyways I got a 8gb PNY micro sdhc card cl10. The pad sees the card and shows it's memory, but the info on the card disappears after a few minutes (usually when I go to another application). Only when I dismount and take the card out and re-insert will it show the data again. I also cannot create a folder on the sdhc card from the Superpad. Any ideas? If you need an other info please let me know.

    T Rob
     
  2. probbiethe1

    probbiethe1 Super Moderator Staff Member

    Joined:
    Jun 30, 2010
    Messages:
    1,838
    Likes Received:
    139
    Trophy Points:
    310
    Location:
    Gilbert, Arizona
    What app are you using to view what's on the sd card

    Sent from my Vizio Tab/ Universal Remote
     
  3. trob613

    trob613 Member

    Joined:
    Jan 16, 2012
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    60
    Location:
    Murrieta CA
    Tablet / Device:
    Superpad 1
    I'm using the "My Pad" app-at the top it shows the local drive and the card as SD1.
     
  4. trob613

    trob613 Member

    Joined:
    Jan 16, 2012
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    60
    Location:
    Murrieta CA
    Tablet / Device:
    Superpad 1
    I think I may have solved the issue. Each time I dismounted the card I had done it from the "My Pad" app-I always waited until it said it was safe to remove the card. The last time I dismounted I went through the main settings. After re-installing the card I have not had any issues with it-very strange. Hope this might help the one other person in the world this may ever affect:)
     

Share This Page