Just KNEW Id do it eventually!!!

Discussion in 'eGlide4' started by leeb, Sep 24, 2012.

  1. leeb

    leeb Member

    Joined:
    Jul 16, 2011
    Messages:
    463
    Likes Received:
    21
    Trophy Points:
    87
    Tonite when I got home I found that Tiny's power supply wouldnt charge anymore...


    So whaddid I do? OPENED HIM UP, of course! :rolleyes:

    ... and here's what I found out.

    CPU - ZeniTHINK Zt180a - p2v654.0
    Hynix H27ubg8t2ATR (4Gb NAND 'HD')
    KH KH29sv400CBTC-70Q (512Mb NOR Flash) ** common in MANY devices **

    system board (and a SMALL SUCKA it is too!)
    SHOUYING m799rb-128x8-MAINB=V2.0 (2011.12.01)

    Stickered P799RGM v2.0 sn 12020193alxxxxxxx

    So... Tiny is basicaly a zenithink m799 with a software upgrade... plus some, I suspect.

    He was alot easier to put back together than to take apart... IF I HAD ONLY KNOWN...

    The two halves of the shell SLIDE APART (Front to RIGHT, back to LEFT) once the screw is removed from the right (connector) side...
    Damaged a couple of the retaining points, but luckily not too many. Still looks/feels good when reassembled!

    NOW... to wait & see about a replacement power supply!

    impatientpacingabout.jpg
    :D

    Oh... found the pad(s) for the JTAG connector too... :rolleyes:
     
    Last edited: Sep 24, 2012
  2. leeb

    leeb Member

    Joined:
    Jul 16, 2011
    Messages:
    463
    Likes Received:
    21
    Trophy Points:
    87
    Have heard from eMatic already today... and have begun the RMA procedure.

    They want me to send them the old p/s, of all things... but that's okay.
    As long as they send me a replacement as 'promised' I will be happy.
    PLUS,
    The BRAND-NEW xl pro 2 I just got ALSO has a 5v power supply, and WILL CHARGE from USB...
    so,
    I can charge it from USB and allow Tiny to use its p/s until the new one arrives! All is hunkie-dorie at this point! :D
     
  3. TGamel

    TGamel Member

    Joined:
    Apr 1, 2011
    Messages:
    47
    Likes Received:
    3
    Trophy Points:
    72
    Location:
    Texas
    Tablet / Device:
    Coby Kyros 7" MID7015A, Vizio 8" VTAB 1008, EMatic 10" eGlide XL Pro II
    That is the only way I charge my tablet. I hate that puny little charger...
     
  4. leeb

    leeb Member

    Joined:
    Jul 16, 2011
    Messages:
    463
    Likes Received:
    21
    Trophy Points:
    87
    Well, should it happen again, Im gonna cut the wire off and attach the cord to a more reliable/capable charger...
    Unless, of course, I snap it off. :rolleyes:

    Good thing the XP pro 2 also uses the same charger! :D
     

Share This Page

Search tags for this page

kh29sv400cbtc-70q pinout

,
zenithink zt180a p2v654