Mid722: Display problem after opening the case

Discussion in 'Coby Generation 2 Technical' started by didi878, May 3, 2012.

  1. didi878

    didi878 Member

    Joined:
    May 3, 2012
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    60
    Location:
    Deutschland
    Tablet / Device:
    Samsung 10.1 N, Coby mid 722
    I opened the case of my Coby Mid722 because of a
    water damage. After that the touchscreen ditn t react
    to input. I first thought it is broken,but if i press a
    little bit on the backside of the case, it is working
    again. Anybody got any ideas how i can fix this?
     
  2. Vernox701

    Vernox701 Member

    Joined:
    Sep 1, 2011
    Messages:
    142
    Likes Received:
    9
    Trophy Points:
    87
    Location:
    Nevada
    Tablet / Device:
    Coby mid8024,Coby mid1024
    Yes reopen your case and make sure all the ribbons are connected especially the wide one with the blue end also there is a more slender cable attached to a a piece with yellow film that one probably was loosened
     
  3. didi878

    didi878 Member

    Joined:
    May 3, 2012
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    60
    Location:
    Deutschland
    Tablet / Device:
    Samsung 10.1 N, Coby mid 722
    Thanks, guess you are right. A yellow film was dropping out
    after i opened the case. Must the more slender cable be connected
    with the case ?
     
  4. didi878

    didi878 Member

    Joined:
    May 3, 2012
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    60
    Location:
    Deutschland
    Tablet / Device:
    Samsung 10.1 N, Coby mid 722
    Well i only see 2 grey ribbons, they don t have a connector, and no ribbon with a blue end. Fixing them with a sticky tape helped
    a bit. The touch screen is reacting now, only turn round of the display still does not work.
     

Share This Page