Upgrading 3g module in Haipad M7X

Discussion in 'Samsung Based' started by magicx, Dec 21, 2011.

  1. magicx

    magicx Member

    Joined:
    Dec 10, 2011
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    60
    Tablet / Device:
    Haipad M7X, iPad2
    [h=1]Hello,

    I have a Haipad M7X bought from Spemall.com (http://www.spemall.com/7-
    inch-Dual-Camera-Android-2-3-OS-Tablet-PC-Built-in-3G-GPS-and-Bluetooth-Module-Samsung-A8-PV210-1Ghz-512RAM-Haipad-M7X_g.html?Page=1). The 3G reception is very poor and it's almost impossible to make it connect to my carrier here in Denmark, Europe. I was hoping that the 3G firmware update available at http://www.haipad.net/DownloadShow.asp?ID=34 would resolve the issue, but I'm having difficulties in upgrading:

    Prepare a TF card with FAT32, put all the files from the archive on the TF card and place it in the external TF slot in the device. I press POWER+MENU and the upgrade process is activates. After a few seconds it says "Can not find any update image". Please help me understand what I'm doing wrong.

    I've flashed the device with firmware available here: http://www.haipad.net/
    DownloadShow.asp?ID=33 - this worked just fine with the same procedure as outlined above.

    Thanks!
    [/h]
     

Share This Page