TheShareWizard
Senior Member
- Sep 6, 2011
- 2
- 0
Hello guys,
i've experienced a very very low tablet reception levels of my WiFi instead a lot of other devices that works fine.
I want to make some hardware hack to boost WIFI Reception on clone of ZT-181.
My device mount an usb-pcb solution of CC&C and called WN-294.http://www.ccandc.com.tw/products_2.php?prod=106
Is un USB wifi dongle directly connected to tablet PCB via the 4 wire.
I wish to know where can i weld some wire to make an homemade built-in WiFi antenna can fit inside the tablet.
There's a lot of video but are not referred to this particular version of WiFi module.
Anybody can help me ?
i've experienced a very very low tablet reception levels of my WiFi instead a lot of other devices that works fine.
I want to make some hardware hack to boost WIFI Reception on clone of ZT-181.
My device mount an usb-pcb solution of CC&C and called WN-294.http://www.ccandc.com.tw/products_2.php?prod=106
Is un USB wifi dongle directly connected to tablet PCB via the 4 wire.
I wish to know where can i weld some wire to make an homemade built-in WiFi antenna can fit inside the tablet.
There's a lot of video but are not referred to this particular version of WiFi module.
Anybody can help me ?
Last edited:
anche io ho provato a saldare un pezzo di filo rigido come antenna e praticamente non è cambiato una cippa. Ho anche editato il file di configurazione specifico per questo scheda wifi impostando il protocollo wifi a velocità più bassa e impostando come country l'Italia (di default è un altro paese ma non ricordo quale) senza però ottenere significativi miglioramenti. Tu hai scoperto qualcosa?