how to upgrade / re-install firmware on Maipad MX10G

[eddiex666]

Hi folks,

I want to upgrade my Maipad MX10G tablet...and I need help to
1. what firmware can I use
2. how to upgrade

Its a YOSpad, Infotmic 220...
When I boot it up its a LOGO (OEM) screen, I can press HOME + BACK and I get some "re-install" screen...
on black screen it sayes....
1. press the req. keys to apply the factory settings. ( I press HOME + BACK)
2. Getting recovery image
3. extracting image
4. burning file system
5. recovery OK

This makes the device "re-install default firmware"

I want to find some other firmware...

Any tips????



Greetings Eddie

 

[eddiex666]

I have attached the boot menu / logo, if that help any1 to tellme what kind of device I have.
and maybe how to upgrade...



Any info att all will help.... så pleeeaasseeee

 

[eddiex666]

i am desperate.... please, any 1 ???

1. is it possible to install some other firmware?
2. what firmware? any tips?
3. how?

 

[eddiex666]

Still no1 ??????

I have tryed to use the flash tool....
http://www.androidtablets.net/forum/infotmic-based/17274-introduction-iuw-burning-tools.html

But I cannot get the device on to "connected to PC"..
I have tryed all king of USB cables... I press power, then "home + back" and it starts "recover"...
But it does not read from any of the 2 SDcard readers....

I have testet to put the 4 files... ramdisk, system, uImage and userdata on a SDcard.. (on the root and in a android folder)

Still no luckkkkkkk... heeeeeelp

 

[eddiex666]

It sayes:
Model number: YOSpad
Android ver: v2.2 2011-06-25 (011111)
Kernel: 2.6.32.9 root@jackie-desktop #145
build nr: FRF85B

The hardware should be (10.2" Flytouch 4 Android 2.2 Tablet - MaPan MX10G - Built-in 3G, GPS Support WIFI Flash 10.1 1080P HDMI G-sensor)
Prossesor: Infotmic 220
1 USB OTG
2 SDcard readers
1 3G card - simcard slot

still please, any info will be nice info...

 

[loginas]

I have attached the boot menu / logo, if that help any1 to tellme what kind of device I have.
and maybe how to upgrade...

View attachment 4711

Any info att all will help.... så pleeeaasseeee

eddiex666 , Can you explain the steps of attaching boot menu / logo? I have MaiPad MX710 with Android 2.3 , and i won't to remove MaiPad boot logo and put my custom Logo.

Tnx

 

[loginas]

Can you explain the procedure of changing the boot logo?