Hello.
I've got a Tablet - SmartBook SmartPad UMTS with 3G modem inside and Android Froyo 2.2 - it has also Tegra 2 chipset inside.
The problem is i can't boot tablet it stuck on black screen and nothing more.
I do a hard reset setting tablet then tablet turn off and i can't boot it again.
There is any solution to hard reset (key combination) or other idea?
There will be a trick when the tablet boots to put in newer Android version ? Like Gingerbread or even ICS. (running Tegra 2 so i think its possible)
The factory of this tablet does not give any support...
I pray to found way to turn on this ****.
Sorry for my English.
Kind Regards.
[TABLE="width: 400, align: center"]
[TR]
[TD="bgcolor: #D7DCFF, align: left"]System operacyjny[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]Android OS,v2.2[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Wyświetlacz[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]10.1(25.7cm) TFT,rozdzielczość 1024 x 600, multi touch(capacitive with 4 points)[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Procesor[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]NVIDIA® Tegra 250 chipset, 1.0 GHz[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Pamięć RAM[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]512 MB DDR2[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Pamięć ROM[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]512 MB, SLC[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Sensor ruchu[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]G-sensor[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]WLAN[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]802.11 b/g[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Bluetooth[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]BT 2.1+EDR[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Kamera[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]1,3 Mio Pikseli(przód)[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Porty I/O[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]1 x złącze dokujące(30 Pin), 1 x Gniazdo słuchawek mini-jack 3,5 mm, 1 x USB2.0,
1 x HMDI, 1 x microSD/ 1 x SIM card reader[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Bateria[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]Polymer 3300 mAh, 7,4V[/TD]
[/TR]
[/TABLE]
I've got a Tablet - SmartBook SmartPad UMTS with 3G modem inside and Android Froyo 2.2 - it has also Tegra 2 chipset inside.
The problem is i can't boot tablet it stuck on black screen and nothing more.
I do a hard reset setting tablet then tablet turn off and i can't boot it again.
There is any solution to hard reset (key combination) or other idea?
There will be a trick when the tablet boots to put in newer Android version ? Like Gingerbread or even ICS. (running Tegra 2 so i think its possible)
The factory of this tablet does not give any support...
I pray to found way to turn on this ****.
Sorry for my English.
Kind Regards.
[TABLE="width: 400, align: center"]
[TR]
[TD="bgcolor: #D7DCFF, align: left"]System operacyjny[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]Android OS,v2.2[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Wyświetlacz[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]10.1(25.7cm) TFT,rozdzielczość 1024 x 600, multi touch(capacitive with 4 points)[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Procesor[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]NVIDIA® Tegra 250 chipset, 1.0 GHz[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Pamięć RAM[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]512 MB DDR2[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Pamięć ROM[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]512 MB, SLC[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Sensor ruchu[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]G-sensor[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]WLAN[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]802.11 b/g[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Bluetooth[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]BT 2.1+EDR[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Kamera[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]1,3 Mio Pikseli(przód)[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Porty I/O[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]1 x złącze dokujące(30 Pin), 1 x Gniazdo słuchawek mini-jack 3,5 mm, 1 x USB2.0,
1 x HMDI, 1 x microSD/ 1 x SIM card reader[/TD]
[/TR]
[TR]
[TD="width: 100, bgcolor: #D7DCFF, align: left"]Bateria[/TD]
[TD="width: 300, bgcolor: #D7DCFF, align: left"]Polymer 3300 mAh, 7,4V[/TD]
[/TR]
[/TABLE]