mgonzalez87
Member
- Oct 13, 2011
- 8
- 0
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
is it fully charged? does it show any charging at all? any boot up screens?
No... logo comes out....sounds like a full brick. You don't even see the Coby logo?
i tryed everything....Try pushing the reset button on the back for a couple of seconds and then turning it on.
Sent from my Kyros MID7022 8K using Tapatalk
if you are seeing the Logo, that is a good sign. have you tried to put it into recovery mode?
Download the stock firmware
1. Copy all files to a MicroSD card, i recommend a clean one...
2. Recharge
3. After recharge TURN OFF ( you are already off.
4. Insert the card at the MicroSD slot
5. Press the home menu, keep pressing and TURN the tablet ON. Release both keys when the screen lights up.
6. After that, a recovery menu will appear, then you can release the home button.
7. Wait a few minutes while system works
8. System will shut down, TURN it ON again
9. DONE!
it dosn't trun on at all
if you are seeing the Logo, that is a good sign. have you tried to put it into recovery mode?
Download the stock firmware
1. Copy all files to a MicroSD card, i recommend a clean one...
2. Recharge
3. After recharge TURN OFF ( you are already off.
4. Insert the card at the MicroSD slot
5. Press the home menu, keep pressing and TURN the tablet ON. Release both keys when the screen lights up.
6. After that, a recovery menu will appear, then you can release the home button.
7. Wait a few minutes while system works
8. System will shut down, TURN it ON again
9. DONE!
I have the same problem, however i do have the logo yet thats all i see...these steps didnt help, any other suggestions?
What's your tablet model?
What firmware did you use?
If the process ended without errors on screen and it's stuck in the Coby logo then maybe your internal microSD is bad.
i have a coby kryos mid1024
firmware was the latest 1024 available thru coby