[HOW] Galaxy Tab 7.7 (P6800 & P6810) ICS Rooting, UnRooting and Return To Stock

Astrix

Super Moderator
Staff member
May 7, 2012
383
96
Galaxy Tab 7.7 P6800 & P6810
Rooting ICS Firmware

animated-gifs-exclamation-points-016.gif

DISCLAIMER
AT YOUR OWN RISK




Rooting

- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
- Choose apply update from external storage.
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.

Once you had install the cwm recovery, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer.

Install CWM-based Recovery v5.5.04
- Download this cwm recovery P6800 (3G+Wifi) here: CWM-P6800-20120710.tar
- Download this cwm recovery P6810 (Wifi Only) here: CWM-P6810-20120710.tar
- You need Mobile Odin(PAID) to flash cwm recovery.tar: MobileOdin Pro
- Once Mobile Odin installed. (You can use PC Odin, Why I choose Mobile Odin? reason: To support Developer)
- Launch Mobile Odin, click .tar (Choose the location/path which you put your .tar).
- Once you choose, click Flash firmware *There will be warning pop up. Just click continue.
- It will boot to recovery and you're done.
* Your cwm recovery now will be CWM-based Recovery v5.5.04.

Update your Superuser to SuperSU
- Download the SuperSU (this will replace the existing superuser) and place in your SDCARD: here
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery) or using QuickBoot: here
- Once in recovery: (navigate to any location using volume button and select using power button).
- Choose install zip from sdcard .
- Choose zip from sdcard.
- Choose CWM-SuperSU-v0.93.zip and Yes - Install.
- Once done, choose reboot system now.
* You will find superuser app had been replaced with SuperSU.


smile.png
Enjoy Your Rooted ICS Tab 7.7
smile.png

If You Have Any Better Method
Do Share With Us

logo.png


Source and Thanks
Chainfire for the Rooting Process and Tools
Rachmat3 for Temp CWM Recovery and Method
Locerra For The CWM Based Recovery

Feel Free To Thanks Them At Their Thread
 
Last edited:
How to UnRooting or Return To Stock for Galaxy Tab 7.7 P6800 & P6810 to Android 4.0 Firmware
Method are the same. You can use this method to upgrade or update firmware.

animated-gifs-exclamation-points-016.gif

DISCLAIMER
AT YOUR OWN RISK​



  1. First, download and install Kies on your computer in order to install the drivers for the tablet. After installing Kies, however, make sure Kies is NOT running. Exit it from the Taskbar at the bottom if it is running as it can interfere with the flashing process.
  2. To be sure you don’t lose data, backup your Apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc. This Android backup guide would help you.
    Important! Don’t forget to at least make a backup of your APN settings, which you can restore later if your data connection does not work after installing the ROM. Use the backup guide to find out how.
  3. Download the Android 4.0.4 firmware: P6800 (3G+Wifi) OR P6810 (Wifi Only)
  4. Extract the .zip file once to obtain a file named P6800_or_P6810_HOME.tar.md5 (the filename may end at .tar, which is normal).
  5. Download Odin 1.85 from → here.
    Filename: Odin3-v1.85.zip
  6. Extract the contents of the Odin3-v1.85.zip file to a folder.
  7. Now, turn off your Galaxy Tab 7.7, then boot into Download Mode. To do so, press and hold the Volume Down + Power buttons till the screen turns on, then let go of the power button but KEEP holding the Volume Down button till you get a caution prompt asking you whether you want to enter download mode. Here, let go of the volume down button then press the Volume Up button to confirm and enter download mode.
  8. Open Odin (from step 3) — double-click the Odin3 v1.85.exe that you got after extracting the file Odin3-v1.85.zip.
  9. Connect your tablet to the computer. You should get the message “Added!” under Odin’s message box in the bottom left. If you don’t get this message, then probably there is a problem with drivers. Check that Kies is properly installed (but again, make sure it is not actively running even in the taskbar). Also try to switch to another USB port – preferably a USB port on the back if using a desktop computer.
  10. In ODIN, click the PDA tab, then select the P6800_or_P6810_HOME.tar.md5 file that you obtained in step 3.
  11. Important! Do not make any other changes in Odin except selecting the required file in PDA as given in step 9. Leave all other options as they are. Do NOT check the Re-partition option.
  12. Now, hit the START button to start flashing the Android 4.0 firmware on your Galaxy Tab 7.7. After the flashing is complete, the tablet will automatically reboot. You’ll also get a PASS message in ODIN. You can now safely disconnect your tablet from the computer. What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn tablet on in Download mode again, and do the procedure again from Step 7.

animated-gifs-exclamation-points-016.gif

DISCLAIMER
AT YOUR OWN RISK​


logo.png
 
Last edited:
Op updated:
- To include P6810 (Wifi Only) as ICS had been release for it.
- Update to UnRooting and Return To Stock
 
Last edited:
Back
Top