Please help. device stop at uberoid Logo

PRODIKEY

Member
Jul 9, 2011
2
0
HI Please help
I just brought and try to flash the firmware to Uberoid WM8650 1.3.0 HYBRiD HoneyCombMOD v6 FiNAL

I have also try to change the config changer, Option 1 , 11 and 8
all not working ...

the device stop at uberoid logo for very long times.

GREEN LED. Black audio jack ... am i select the collect configure number for the device.. if not what number should I choose..

pls. help
 
Normally when the uberoid logo stops, the option you have chosen don't work on your tablet. This is still manageable you just have to try other options that will work. From my experience installing this, Since I have an 8 Inch tab, I got a working option from a 7 inch tab. I just modified some codes to change the resolution.

You really need to identify which tablet you have,please refer to their website.

HcH'z TechKnow [www.HcH.net.tc] - View topic - HOW TO IDENTIFY MY TABLET - Noobies read this first!!
 
I had the same problem but I just tried a different ROM with a device description that fitted, got it going second time round and no harm done.
Good luck
Jay
 
Back
Top