[ROM] Moonse E-X8 Rooted Firmware

NightLord

Member
Dec 13, 2010
46
0
So, thanks to the invalueable help of Xeaueious, the E-X8 (8" RK2818) is now rooted.

Flash this image to your device, and use z4root to gain permanent root.

Use anycut to create shortcut to the Gallery.

http://nightlord.freeweb.hu/E-X8.root/update.img

290060626_959.jpg


Be advised, that the internal flash will be formatted after flashing.

Original firmware can be downloaded from here:

http://nightlord.freeweb.hu/E-X8.stock/update.img

Tools required for flashing:

http://nightlord.freeweb.hu/DevTools.zip

Install the drivers after putting the tablet in recovery mode (switch off the device, press and hold menu, then switch on while keeping menu button hold until windows recognizes the device).
After successfull installation, RKAndroidBatch will recognize the device when it's in recovery mode (in device upgrade area, the box with number 1 in it will light up green) - you can now select the desired image file, and start flashing.
 
Last edited:
I no longer have a working device, since mine got broken. Anyways, I don't even know if there exists a 2.2 build for the rk2818 at all.
 
Hi Nightlord, the link is dead, where i can get new link for download rooted image?

thanks..
 
Hi, Nightlord, I have a Moonse E-X8 and I tried to flash a rooted ROM to it so that I can turn this old device into a server (I thought it should be a good server because of its metal case for heat ventilation :) However, I tried different RK2818 ROM and the display not working. Finally I found your post but the link not working anymore. I hope you still have the ROM and can you share it with me?

Thanks,
 
Back
Top