paintballeralex07
Senior Member
- May 24, 2012
- 122
- 18
I've had this for close to a year and it's very great to have 1gb for apps. You will have to format your tablet and reflash your rom but I think it's worth it and I know you will like it too.
You will need to have a copy of ClockworkMod (CWM) Recovery on your pc that works on the tablet. I suggest instead of the recovery, to have the fwdn image of CM7, this is better because it installs both the recovery and CM7.
FYI this will erase all your tablet including internal sdcard. I suggest you have backup of all your media and your app if you want.
This is a very sensitive procedure. Read it at least 2 times before you start and make sure you understand it.
Once you do this there is no turning back. Beware, if you do something wrong this can brick your tablet. I'm not responsive for damages caused by your decisions and/or actions nor am I resposible for the cause of a nuclear explosion that your tablet causes.
-Download the following zip file:
kyros_7022_lkrom.zip - 4shared.com - online file sharing and storage - download - Alexis Diaz
-Extract the contents anywhere you like. You should have 1 folder, 1 software, and 1 lk.rom file.
-Open the trieber folder and install your telechips driver right click run as administrator.
x86 is there (treiber 5.0 x86bit) and the 64 bit is in a folder called VTC Driver Installer etc. (dpinst for install setup). Double click on the one that pertains to your windows version.
-After installion finishes, double click on the FWDN_Software_2_13 file, you should have it open
-Shutdown your tablet.
-While turning on your tablet hold the HOME button.
-You should see a screen with something saying "FWDN".
-Plug the tablet to your pc with the usb cable and don't unplug it until I say so!!!
-In the opened fwdn software a notification might come up. "Nand partition change detected. It will erase whole Nand" this will completely delete all your device files: system, boot, data, user data, cache, dalvik, including all you file on the internal memory. Make sure you have backups of you music, pictures, blahblahblah. Click "OK" to proceed
- the process dialog box should turn green once its finished or it should tell that it's finished
-Click the "..." button. Now select the lk.rom file within your workspace folder.
-Click "add file" button. Now you should have the lk.rom file inside the grid. Make sure it is checked and selected.
-Switch from "Default Download" to "Low format whole memory before download"
-Click "Start" and wait until the first part is done.
-Unmark or delete (press the delete button on keyboard) the lk.rom file.
-Now click on NAND DATA and click the "..." button, save the file somewhere easily accessible.
-Click "Create Image" =it finishes and says something like this "MAKE FAT IMAGE SUCCESS" press "OK"
-Press "..." button and select the recovery.img ClockworkMod (CWM) file that you have. Click "add file". (I suggest you download the cm7 fwdn zip and flash the file tc8803mtd.img (-this will flash both cm7 and cwm recovery-) file and add it instead of the recovery. It is better to flash a rom rather than a recovery image.)
-Check mark the .img file
- Also add the nand file that you saved earlier and select it as well
-There should be 2 files inside the fwdn software grid
-Make sure both are check/selected
-Change from "Low format whole memory before download" back to "Default Download"
-Press the "Start" button
-Wait until the window turns green and press the reset button on your tablet.
-If you did it correctly you should be able to boot to recovery or cm7.
If this was succesful and it booted to CM7 then you can flash the ICS update.
This is exactly the procedure that I did and I have 1gb for apps on my tablet.
Oh my freaking chicken nuggets, that was a lot of typing. Corrections made and thread updated.
You will need to have a copy of ClockworkMod (CWM) Recovery on your pc that works on the tablet. I suggest instead of the recovery, to have the fwdn image of CM7, this is better because it installs both the recovery and CM7.
FYI this will erase all your tablet including internal sdcard. I suggest you have backup of all your media and your app if you want.
This is a very sensitive procedure. Read it at least 2 times before you start and make sure you understand it.
Once you do this there is no turning back. Beware, if you do something wrong this can brick your tablet. I'm not responsive for damages caused by your decisions and/or actions nor am I resposible for the cause of a nuclear explosion that your tablet causes.
-Download the following zip file:
kyros_7022_lkrom.zip - 4shared.com - online file sharing and storage - download - Alexis Diaz
-Extract the contents anywhere you like. You should have 1 folder, 1 software, and 1 lk.rom file.
-Open the trieber folder and install your telechips driver right click run as administrator.
x86 is there (treiber 5.0 x86bit) and the 64 bit is in a folder called VTC Driver Installer etc. (dpinst for install setup). Double click on the one that pertains to your windows version.
-After installion finishes, double click on the FWDN_Software_2_13 file, you should have it open
-Shutdown your tablet.
-While turning on your tablet hold the HOME button.
-You should see a screen with something saying "FWDN".
-Plug the tablet to your pc with the usb cable and don't unplug it until I say so!!!
-In the opened fwdn software a notification might come up. "Nand partition change detected. It will erase whole Nand" this will completely delete all your device files: system, boot, data, user data, cache, dalvik, including all you file on the internal memory. Make sure you have backups of you music, pictures, blahblahblah. Click "OK" to proceed
- the process dialog box should turn green once its finished or it should tell that it's finished
-Click the "..." button. Now select the lk.rom file within your workspace folder.
-Click "add file" button. Now you should have the lk.rom file inside the grid. Make sure it is checked and selected.
-Switch from "Default Download" to "Low format whole memory before download"
-Click "Start" and wait until the first part is done.
-Unmark or delete (press the delete button on keyboard) the lk.rom file.
-Now click on NAND DATA and click the "..." button, save the file somewhere easily accessible.
-Click "Create Image" =it finishes and says something like this "MAKE FAT IMAGE SUCCESS" press "OK"
-Press "..." button and select the recovery.img ClockworkMod (CWM) file that you have. Click "add file". (I suggest you download the cm7 fwdn zip and flash the file tc8803mtd.img (-this will flash both cm7 and cwm recovery-) file and add it instead of the recovery. It is better to flash a rom rather than a recovery image.)
-Check mark the .img file
- Also add the nand file that you saved earlier and select it as well
-There should be 2 files inside the fwdn software grid
-Make sure both are check/selected
-Change from "Low format whole memory before download" back to "Default Download"
-Press the "Start" button
-Wait until the window turns green and press the reset button on your tablet.
-If you did it correctly you should be able to boot to recovery or cm7.
If this was succesful and it booted to CM7 then you can flash the ICS update.
This is exactly the procedure that I did and I have 1gb for apps on my tablet.
Oh my freaking chicken nuggets, that was a lot of typing. Corrections made and thread updated.
Attachments
Last edited: