Hi everyone.. I need the original ROM for the tablet. Rom has Script file which allow you to install and update the system. You may do not know what ROM means but you can check it in the link below: http://www.androidtablets.net/forum...touch-firmware-releases-via8505-7-tablet.html my tablet : 10.2" Android 2.1 Tablet PC Wifi Wi-fi 3G HDMI Cam GPS on eBay (end time 19-Feb-11 00:57:52 GMT)
ok a couple of things first i dont think your tablet is a coby but i do think it has a infotmic chip so you should have probably posted this here http://www.androidtablets.net/forum/infotmic-based/ second thing how did you lose the original firmware, like how did you change it to something else? because my suggestion would be to try this http://www.androidtablets.net/forum...d-neno-ensopad-4-10-2-android-2-1-tablet.html but make sure that is your specific tablet first
Thanks man.. yes it has an infotmic chip !! the story behind losing my firmware: I dont know really how but one day after I bought my tablet, I switched off and on again and that's it !! doesnt work ! - I downloaded things from the Market. - I changed the font from ( System/fonts ) because I want to read and write using my Language - I changed a file called ( libwebcore.so ) it was working properly but some programmes doesnt allow me to write by using my language. I decided to change libwebcore.so again. - I restarted my tablet ... not working until now !!!!! I heard some people says that : libwebcore.so 1.6 sometimes does not work like libwebcore.so 2.1 I mean if you have operating system 2.1 , do not take libwebcore 1.6 .. and so on !! from where and how can I get my tablet fixed ? thanks
I dont really know what to do !!! no recovery image is found, try to recover from SD this was the last message i saw on the screen sometime it show me ( Green screen with WOWPAD logo ) sometimes only the logo of Infotmic !! it is killing me man ... what is next ?
That's most likely a Flytouch II variant. Debricking hints here: http://www.androidtablets.net/forum/gome-flytouch-ii/5152-recovering-brick.html
Your booting description sounds like a FT2 alright. However, going by your description of: - I changed the font from ( System/fonts ) because I want to read and write using my Language - I changed a file called ( libwebcore.so ) would appears that you have damaged the system files to the point where it will not complete boot properly. Perhaps some linux guru can assess the severity of the damage. From this, I would deduce that wipe & factory restore WILL NOT WORK. Your only solution is to flash a new ROM as that will completely restore your corrupted firmware/system. Look around for FT2 firmware in this forum. I recommend ver 1568 as it is available in a simple update.zip that you just place on a microSD. Read the instructions carefully & have your registration code ready to re-register.
Thanks cruxader for being here helping me out ! Do you mean that I should put update.zip on the SdCard and switch the tablet on ? because I tried this solution ... did not work.. does not boot !!!! or you mean I have to use some programmes and USB cable ?
I followed the instructions until Step 3 but then .. maybe because I used usb sable male to male .. my computer didnot say ( a new usb device has been found) what can i do ??
The first post in http://www.androidtablets.net/forum...-useful-info-also-manually-update-1568-a.html explains how to get & update to 1568. The instructions are a bit brief. To get to recovery menu, hold Home button down. Press & hold power button. Release the power & Home button when the second or 3rd screen (Green is 3rd) shows up. It should bring you to the recovery menu. Use the Volume +/- buttons to move the selection. Press Menu button to activate selection. There is no need to boot to completion. No USB cables needed.