Ainol Tab Novo 7 Mars Appears Deep Bricked

duser

Member
Oct 10, 2014
3
0
Hi Fuser,

A couple days ago I found your guide .
I have Ainol Tab Novo 7 Mars appears deep bricked as it does not turn on.
When I tried to rescued it from SD-card I got a different screens (Logo screen, "upgrading, please wait . . . " etc) but there is no "Firmware Upgrade Menu" .
When plugged into my PC, short pins on NAND flash + Power On it identifies M3-Chip, then it installs the World Cup Drivers.
It is recognised in AMLogic Burning Tool.
When I erase NAND, it usually proceeds completely to 0% .
Everytime I tried to unbrick I get the same message from USB-Burning-tool-v1.6.21 :
" load spl ...
write data to ram failed! "

I nope it is not a RAM problem and maybe you can help.

Application Output Log:

current pc version is: xp
current tool version is: v1.6.21
-----importConfigFiles-----filenameE:\USB-Burning-tool-v1.6.21\resources\config_progress.xml
[T 0][13:20:34]: load spl ...
[T 0][13:20:35]: write data to ram failed!
[T 0][13:20:36]: before loadSpl, identify is -1
[T 0][13:20:37]: before loadSpl, identify is -1
[T 0][13:20:38]: before loadSpl, identify is -1
[T 0][13:20:39]: before loadSpl, identify is -1
[T 0][13:20:40]: load spl ...
.
.
.
[T 0][13:21:00]: load spl ...
[T 0][13:21:00]: before loadSpl, identify is -1
[T 0][13:21:01]: before loadSpl, identify is -1
[T 0][13:21:02]: before loadSpl, identify is -1
[T 0][13:21:03]: before loadSpl, identify is -1
[T 0][13:21:04]: before loadSpl, identify is -1
[T 0][13:21:05]: load spl ...
[T 0][13:21:05]: before loadSpl, identify is -1
[T 0][13:21:05]: load spl failed 20 times,maybe because rom code cannot run

Sorry for my bad English . . .
 
Last edited:
Hi Fuser,

A couple days ago I found your guide .
I have Ainol Tab Novo 7 Mars appears deep bricked as it does not turn on.
When I tried to rescued it from SD-card I got a different screens (Logo screen, "upgrading, please wait . . . " etc) but there is no "Firmware Upgrade Menu" .
When plugged into my PC, short pins on NAND flash + Power On it identifies M3-Chip, then it installs the World Cup Drivers.
It is recognised in AMLogic Burning Tool.
When I erase NAND, it usually proceeds completely to 0% .
Everytime I tried to unbrick I get the same message from USB-Burning-tool-v1.6.21 :
" load spl ...
write data to ram failed! "

I nope it is not a RAM problem and maybe you can help.

Application Output Log:

current pc version is: xp
current tool version is: v1.6.21
-----importConfigFiles-----filenameE:\USB-Burning-tool-v1.6.21\resources\config_progress.xml
[T 0][13:20:34]: load spl ...
[T 0][13:20:35]: write data to ram failed!
[T 0][13:20:36]: before loadSpl, identify is -1
[T 0][13:20:37]: before loadSpl, identify is -1
[T 0][13:20:38]: before loadSpl, identify is -1
[T 0][13:20:39]: before loadSpl, identify is -1
[T 0][13:20:40]: load spl ...
.
.
.
[T 0][13:21:00]: load spl ...
[T 0][13:21:00]: before loadSpl, identify is -1
[T 0][13:21:01]: before loadSpl, identify is -1
[T 0][13:21:02]: before loadSpl, identify is -1
[T 0][13:21:03]: before loadSpl, identify is -1
[T 0][13:21:04]: before loadSpl, identify is -1
[T 0][13:21:05]: load spl ...
[T 0][13:21:05]: before loadSpl, identify is -1
[T 0][13:21:05]: load spl failed 20 times,maybe because rom code cannot run

Sorry for my bad English . . .

Hey friend Im facing problem as you, did succeed to fix your MARS?
Please help me!
 
Back
Top