epad 2.1 10.2 inch screen doesnt work anymore..HELP!!

lagathy

Member
Sep 16, 2010
3
0
hi,
the screen wont respond to touch anymore..any ideas what is happening..it is only 3 weeks old (it is zenithink ).
any suggestions most welcome
thanks in advance
paul
 

ghost

Member
Nov 18, 2010
1
0
If you mean blue led on with nothing on screen. I took the back off which is easy,just use small pin in the holes on left side remove back, remove battery lead undo all screws that hold board down then their should be four screws holding down screen take these out.now replace battery lead the screen should liteup in your hands. This worked on mine I hope it works on yours
 

hoben02

Senior Member
Nov 10, 2010
320
14
1) have you tried the external reset switch, on my zenithink zt-180 its a hole small enough for a paper clip
 
Top