WM8650: Factory Firmware or Touchscreen Driver

Hi Coresect,
As far as I know, there're 2 different versions of 8650 tablets (even though they look exactly the same) using different touchscreen decoder chips, namely vt1603 & uor615x. Hence I suggest one thing you can try is to download the ROM from HcH'z TechKnow [www.HcH.net.tc] - Login, extract it to a SD card, and then make the following changes:

1. file FirmwareInstall/packages/fs_patch/root_patch/system/default.prop:
find the line "ro.wmt.touchpannel=0" and change it to,
ro.wmt.touchpannel=1

2. file FirmwareInstall/env/uboot_env_head,
for the 2 lines:
setenv touchcodec vt1603 and
setenv wmt.io.touch 1:vt1603:2:800:480
change them to,
setenv touchcodec uor615x and
setenv wmt.io.touch 1:uor615x:0:800:480

Then make the flashing as usual.

My 8" 8650 got the same problem as yours after flashing the ROM ... it booted up but touchscreen didn't work. It works after making the above changes. Of course I also need to change all the '480's to '600's due to resolution being 800x600 for a 8" tablet, which is not applicable to your 7" case.

Hi,

I maked a new firmware with HoneyCombMOD Uberoid for WM8650 devices v1.3.0 and Original Fake with your instrutions

But I do not have access to the taskbar horizontally, only vertically

It has some configuration that I can do to fix this error?

Link to download: http://kaminet.com.br/repositorio/wm8650_ok.zip
 
Last edited:
i am having the same problem, but i cannot find the propper files within the ROM to complete step 1...... please give some guidance sir.
 
Hi Coresect,
As far as I know, there're 2 different versions of 8650 tablets (even though they look exactly the same) using different touchscreen decoder chips, namely vt1603 & uor615x. Hence I suggest one thing you can try is to download the ROM from HcH'z TechKnow [www.HcH.net.tc] - Login, extract it to a SD card, and then make the following changes:

1. file FirmwareInstall/packages/fs_patch/root_patch/system/default.prop:
find the line "ro.wmt.touchpannel=0" and change it to,
ro.wmt.touchpannel=1

2. file FirmwareInstall/env/uboot_env_head,
for the 2 lines:
setenv touchcodec vt1603 and
setenv wmt.io.touch 1:vt1603:2:800:480
change them to,
setenv touchcodec uor615x and
setenv wmt.io.touch 1:uor615x:0:800:480

Then make the flashing as usual.

My 8" 8650 got the same problem as yours after flashing the ROM ... it booted up but touchscreen didn't work. It works after making the above changes. Of course I also need to change all the '480's to '600's due to resolution being 800x600 for a 8" tablet, which is not applicable to your 7" case.

are there any other decoder chips aside from vt1603 and uor615x?

can anyone show the syntax and parameters of the setenv wmt.io.touch and setenv touchdec?

i am trying to make to work my TS and had done a lot of combination ROM but none of them work.

thanks!
 
I have the following TABLET

Pakistan's Top Online Shop, Nokia, Blackberry, Apple, Casio, Sony, Canon & Much More

i tried to upgrade ROM, everything was fine, expect touch screen is not responding.. kindly suggest me the solution or send me working ROM for my tablet

DEAR BROTHER,fa4han I TOO VICTIM OF OF SYMBIOS K JALI TABLET PC KA, I PURCHASED IT BY ON-LINE ,COST 10,000.AND SAME AS YOU TRAY TO UPGRADE,AND I WAS LOST IT.AND NOW I AM TRYING RESTART HIM BY THE HELP INTERNET, BUT STILL UNSUCCESSFUL,
MAY GOD SUCCESS YOU.I CAN ONLY HELP YOU TO SAY SOME TIPS.
1.NEVER TRY WRONG ROM
2. IDENTIFY YOUR MODEL NAME AND NUMBER(I THINKS Y R MODEL NAME IS 7" WM8650 ARM PROCESSOR SILVAR BACK BLACK AUDIO JACK VIBRATION ON START
I,AM LIVING IN HYDERABAD SINDH ,MY MOB; NO;03003012745 .U CAN SHIRE ME , U MAY SEE ALSO MY THREAD BELLOW ! http://www.androidtablets.net/forum...ly-die-but-only-green-red-charging-light.html
 
main ny upgrade to kr lia hay, but touch screen kam nahe kr rhe...:( external USB keyboard + mouse sy kaam chala rha hon..
 
Hey I think your problem is solved, Just go to on this Topic on HCH forum and download ROM
HcH'z TechKnow [[url]www.HcH.net.tc] - View topic - Problems solved wm8650 7" (Touchscreen + Market + audio)[/URL]


The tablet worked out of the box, but shut down during an App installation and then wouldn't boot up. I flashed a Vestinious M009s ROM and got it working again, but with no touchscreen and a faulty wifi. Basically now I have a semi-working tablet: wifi scanning works but it won't connect, and the touchscreen does not work at all.

Does anyone have a factory standard firmware / ROM they can let me have? It was exactly like the one in this thread: http://www.androidtablets.net/forum/wondermedia-based/10766-via-wm8650-hardware-information.html

Any ideas about the touchscreen? I can live without wifi if I have to, but no touchscreen makes it useless for much.

Here are all the details I can get out of my tablet:

WonderMedia WM8650
APAD 7"
Screen 800X480
533MHZ
ROM: 2 GB
Memory / RAM: 256MB DDR
Micro SD Card Reader
wireless: WiFi 802.11b / g

Tablet Specs
Internal Memory 512 mb
RAM 203 mb
Android 2.2
CPU ABI: armeani
Hardware: WMT
Display: Vestinious M009s Froyo v1.2.2-20110408.115818
Fingerprint: generic/generic/generic/:2.2/Froyo/v1.2.2-20110402.115818:eng
Host: szmce13
ID: Uberoid Froyo
CPU
Processor: ARM926Ej-S rev 5 (v5l)
BogoMIPS: 348.97
FEATURES
android.hardware.touchscreen.multitouch
android.hardware.touchscreen
glEcVers=0.0
Kernel version: 2.6.32.9-default
Details are:
Android O.S. 2.2
Kernel 2.6.32
Build V 1.2.0

everything else was generic or unknown.

It has a green led (red on charging).
It vibrates on turning on.


Now for the photographs.

5lNs6.jpg


GWwHU.jpg


tFKiA.jpg


DU0Le.jpg


1yWFc.jpg


g6zoq.jpg


yc1m0.jpg


wh0jg.jpg



Thanks for any help.

Paul.
 
Last edited:
Hi, I have the same problem, touchscreen not working after flashing, did they change your tablet or did you fix it?
alfonso
 
The tablet worked out of the box, but shut down during an App installation and then wouldn't boot up. I flashed a Vestinious M009s ROM and got it working again, but with no touchscreen and a faulty wifi. Basically now I have a semi-working tablet: wifi scanning works but it won't connect, and the touchscreen does not work at all.
Thanks for any help.

Paul.

i've a similar tablet with a similar box... i've a lot of coloured circles + the same apps icons of your
my touch doesn't works and also the sound doesn't works...
on my box there is an hand-writed model: mf-617

Can anyone help me to re-activate the touch-screen?
 
I have read in the forum, by using uberoid v9, I can upgrade my tablet which have the following characteristics, green led at starting and red led when charging:
Model: Wonder Media WM8650
Android: Froyo (2.2)
Kernel: 2.6.32.9-default
Build: generic-eng 2.2 Froyo,ver1.5.3-20110819.012300


Cpu Info:
Name: ARM926EJ-S rev 5 (v5l)
Freq: unknown
Cores:
Architecture:
BogoMIPS: 797.97Mhz
Hardware: WMT

General specs:
Processor: VIA8650
Frequency: 800MHz
Memory: RAM 256M
Flash Memory: 2GB
Speaker: 8 / 2W
Microphone: Internal
Reset Button
Power button voice + _
Display Resolution: 800*600
Screen size: 8 inch
TFT: Resistant touch screen
Touch screen: Supports resistive touch two points
Camera: No
GPS: No
Bluetooth: No
3G: external 3G function
Video: Support 1080P Movie (mpeg...)
G-Sensor: 4 way G-sensor
Network: WiFi IEEE 802.11b/g
Audio port: 3.5mm Headset
USB: 1*MINI 5PIN USB PORT 9V 1.5A DC-IN
SD: TF up to 32GB
Operating System: Android 2.2
Flash: v10.1 (evaluation version only, Adobe dropped the arm5 support for flash, this is the only version there is)
Adapter: DC 9V 2A

I have done all the suggestions, but still it doesn't work. I just have a blind screen (black) nothing is working. Any ideas have can get it back to work? I will appreciate any help in solving the problem.
 
I have read in the forum, by using uberoid v9, I can upgrade my tablet which have the following characteristics, green led at starting and red led when charging:
Model: Wonder Media WM8650
Android: Froyo (2.2)
Kernel: 2.6.32.9-default
Build: generic-eng 2.2 Froyo,ver1.5.3-20110819.012300


Cpu Info:
Name: ARM926EJ-S rev 5 (v5l)
Freq: unknown
Cores:
Architecture:
BogoMIPS: 797.97Mhz
Hardware: WMT

General specs:
Processor: VIA8650
Frequency: 800MHz
Memory: RAM 256M
Flash Memory: 2GB
Speaker: 8 / 2W
Microphone: Internal
Reset Button
Power button voice + _
Display Resolution: 800*600
Screen size: 8 inch
TFT: Resistant touch screen
Touch screen: Supports resistive touch two points
Camera: No
GPS: No
Bluetooth: No
3G: external 3G function
Video: Support 1080P Movie (mpeg...)
G-Sensor: 4 way G-sensor
Network: WiFi IEEE 802.11b/g
Audio port: 3.5mm Headset
USB: 1*MINI 5PIN USB PORT 9V 1.5A DC-IN
SD: TF up to 32GB
Operating System: Android 2.2
Flash: v10.1 (evaluation version only, Adobe dropped the arm5 support for flash, this is the only version there is)
Adapter: DC 9V 2A

I have done all the suggestions, but still it doesn't work. I just have a blind screen (black) nothing is working. Any ideas have can get it back to work? I will appreciate any help in solving the problem.
 
Any idea i have my lenovo a3300-gv and the lower part 0f the screen wont function,can anyone can identify the problem??

Kernel 3.4.67
Adroid kitkat 4.4.2
 
Back
Top