11.2.1.5.2.0_beta4?

[DigitalPunk]

Ok i can't get 11.2.1.5.2.0_beta4 to flash from SD card to tablet.
I had to re-flash 11.2.0.7.2.0_beta3 back on to the tablet from SD card after Busybox issue(http://www.androidtablets.net/forum/sylvania-tablets/15461-strange.html) so tablet is at DG2.20 hwver 11.2.1.5.
Now after "boot from SD" appears it goes to "remove SD and reset" it does not flash 11.2.1.5.2.0_beta4 to tablet. Any help would be great. Thanks

 

[john_tartar]

Ok i can't get 11.2.1.5.2.0_beta4 to flash from SD card to tablet.
I had to re-flash 11.2.0.7.2.0_beta3 back on to the tablet from SD card after Busybox issue(http://www.androidtablets.net/forum/sylvania-tablets/15461-strange.html) so tablet is at DG2.20 hwver 11.2.1.5.
Now after "boot from SD" appears it goes to "remove SD and reset" it does not flash 11.2.1.5.2.0_beta4 to tablet. Any help would be great. Thanks

I have successfully re-flashed beta4 after busybox bricking, but I did it using the OTG cable method. Goes the same as the this says:
http://www.androidtablets.net/forum...date-synet7lp-sytabex7-android-2-2-froyo.html
Except I don't see anything on the tablet screen (seems dead) until I actually click "burn" in the IUW program (running on my PC) Then the tablet says communicating with pc, etc............ per the instructions

p.s. My review of the BusyBox App on Amazon Market shows up now (says it bricked my tablet)

 

[st0ne]

If you can't get the OGT connection try re-formatting the SD card and re-wrap the beta_4 and try to flash it again. I have had SD cards not work the first time I wrap them. but worked the 2nd or 3rd time. I might be your card, or there was a glitch in the wrapping process.
I have had the best luck with 2gig SanDisk cards.

 

[st0ne]

wait... did I read that right? did you say you flashed 11.2.0.7.2.0_beta3? I haven't seen that one yet...2.0.7.2? or was that 11.2.0.5.2.0_beta3?

 

[DigitalPunk]

wait... did I read that right? did you say you flashed 11.2.0.7.2.0_beta3? I haven't seen that one yet...2.0.7.2? or was that 11.2.0.5.2.0_beta3?

That is correct! I copy/paste the file name right off the .ius file. Also got beta4 on the SD card and flashed it to the tablet. Took a few times but I got it!

 

[Jv90]

11.2.0.7.2.0beta3?? thats a new one??

 

[DigitalPunk]