A200 Powers On, Vibrates, Blank Screen, Can Do APX Mode

Discussion in 'Acer Iconia A200' started by Michale32086, Apr 18, 2013.

  1. Michale32086

    Michale32086 Senior Member

    Joined:
    Nov 8, 2011
    Messages:
    17
    Likes Received:
    3
    Trophy Points:
    170
    I got ahold of an A200 that doesn't appear to be booting. Although it could be that it IS booting but the display is whacked..

    I have done a lot of work with A500s, but this is my first A200, so I am not sure if there are any similarities..

    What happens is I hold the power button on the A200.. I get the vibrate as if it's booting up, but there is nothing on the display. The power light is steady white and, when I plug in the USB Cord I get the DaDong Windows 7 tone, but the drive doesn't load. Device Manager says UNKNOWN DEVICE.

    I power down and then try to put it into APX Mode.. Hold the RESET Button and Power Up.. I get the DaDong tone and Device Manager says NVIDIA USB BOOT-RECOVERY DRIVER FOR MOBILE DEVICES is loaded..

    But I can't get anywhere beyond that. Most likely because I haven't a clue WHERE to go beyond that.. [​IMG]

    Anyone have any hints/tips to throw my way??

    Thanx in advance...
     

Share This Page

Search tags for this page

a200 apx driver

,

a200 dalam apx mode

,

acer a200 apx mode

,

apx driver for acer iconia a200