Momo15 firmware upgrade question

Discussion in 'Ployer Momo Tablets' started by Python_61, Nov 16, 2012.

  1. Python_61
    Offline

    Python_61 Junior Member

    Joined:
    Nov 16, 2012
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Australia
    Tablet / Device:
    Ployer Momo15
    Hi All,

    I recently purchased a Momo15 tablet and had trouble with the multi-touch screen. The store I bought it from said a firmware upgrade would cure this problem, great! They provided the latest LiveSuit software, firmware image and English instructions. But I am unable to complete the firmware upgrade, in fact I cannot even start the upgrade procedure.

    I followed all the instructions to the letter, after starting LiveSuitPack and then LiveSuit (which won't run without LiveSuitPack running), I continue to hold down the Volume + button whilst connecting the tablet to the PC with a usb cable and pressing the Power button ten times, I have even pressed the Power button more than ten times, no luck.

    I have the following simple question. Is the tablet supposed to power up after the Power button has been pressed ten times?

    My tablet does not show any signs of powering up when using the above procedure, otherwise it works fine except for the multi-touch problem.

    Thanks in advance for any help you can provide me.

    Python_61

Share This Page