my Herotab C8 do not flash HELP

Alexx232

Member
May 21, 2011
9
0
this is video of my flash.

when logo is start, flash stop.

HELPP
 
Last edited by a moderator:

Loonix

Member
Nov 18, 2010
228
20
Check the download ed .rar file for integrity
remove all files from your SD card
copy the firmware files again
try to flash again.
Today Haipad released a new Android 2.3 firmware by the way:
????--www.haipad.net
[mirror]
 

Alexx232

Member
May 21, 2011
9
0
Check the download ed .rar file for integrity
remove all files from your SD card
copy the firmware files again
try to flash again.
Today Haipad released a new Android 2.3 firmware by the way:
????--www.haipad.net
[mirror]


Has downloaded under your reference, has checked up archive Winrar, format sd kard, has copied files.

Flash it has turned out, but the problem primary remained. Here this
 
Last edited by a moderator:

Loonix

Member
Nov 18, 2010
228
20
Very strange.
I have never seen that behaviour in a fresh installed firmware, sorry =(
I hope someobdy else can help you.
Maybe you can try other firmwares.
 

Alexx232

Member
May 21, 2011
9
0
I have tried all firmvare, 2,2 have ceased flash in general, as on the first video.

firmware 2.3 flash but there is a problem as on the second video.

It can be caused bed inside sd card in the device? Or firmware flash not on this sd?
 

Alexx232

Member
May 21, 2011
9
0
whis firmvare 2.3 this ****ing trabl

what this?
 
Last edited by a moderator:

Loonix

Member
Nov 18, 2010
228
20
My suspicion would be that something with your flash memory or the internal SD card is wrong.
As i said, i never seen that happening and it is amazing that everything seems fine until you unlock the screen =(
 

Alexx232

Member
May 21, 2011
9
0
My suspicion would be that something with your flash memory or the internal SD card is wrong.
As i said, i never seen that happening and it is amazing that everything seems fine until you unlock the screen =(

I think internal SD as it should be, problems with flash memory.

I am going to send the goods back to the seller.
 

Alexx232

Member
May 21, 2011
9
0
I put and 2,2 and 2,3 many times and on a miscellaneous.

Result: android installs on external SD card also works.

If to pull out an external card that a device it is not loaded, hangs on an inscription android.

From 30 times, it is the first time when he has earned also that incorrectly.

In system inside memory 400mb instead of 4gb

what's the problem?
 

Alexx232

Member
May 21, 2011
9
0
As I wrote earlier, I many times flash firmvare and in once system have given out an error:

Can not find any update image.
Press MENU/KEY_VOLUMEUP key to init SD card, Pres BACK/KEY_VOLUMEDOWN key to cancel!

I have pressed further, and the tablet has joined, but without external SD did not wish to work, internal SD the system did not see.

I have disassembled a tablet and have put in inside, external card SD and that that was inside, now is established outside.

Has collected all back and about the MIRACLE, all works as well as should, all memory it is visible, external SD now it is possible to pull out and the system does not hang.

It is visible in the next loader from times all the same flash in NAND memory

ITS WORKING
 

Alexx232

Member
May 21, 2011
9
0
Errors aren't present, the card is perfectly work.

Let's look as will work further.

All thanks.

After many with flash firmvare SD a card became instead of 8gb all 7gb.

How it to correct?
 

Loonix

Member
Nov 18, 2010
228
20
my guess is that there are still firmware partitions on the 8GB card.
you can try chkflsh to 'lowlevel initialize' the card.

another possibility is that faulty sectors on the card have been dissabled to protect your data ;)
a test on the 'physical level' with chkflsh should reveal them too. (but be aware that complete datalos is shure)
 
Top