coby 7022 stuck in bootloop

Discussion in 'Coby Generation 2 Technical' started by luklyz, Jun 22, 2012.

  1. luklyz

    luklyz Member

    Joined:
    Jun 22, 2012
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    60
    Tablet / Device:
    coby7022
    hi everyone
    this forum it is a great place


    so short story: I bricked my coby 7022 by installing a CWM. Now I`m stuck in bootloop.
    I need help from someone with firmware build 20120106 to post files created from those commands:

    Code:
    dd if=/dev/mtd/mtd1 of=/sdcard/kpanic.img bs=4096
    
    
    dd if=/dev/mtd/mtd2 of=/sdcard/system.img bs=4096
    
    
    dd if=/dev/mtd/mtd3 of=/sdcard/splash.img bs=4096
    
    
    dd if=/dev/mtd/mtd4 of=/sdcard/cache.img bs=4096
    
    
    dd if=/dev/mtd/mtd5 of=/sdcard/userdata.img bs=4096
    
    
    dd if=/dev/mtd/mtd7 of=/sdcard/misc.img bs=4096
    
    
    dd if=/dev/mtd/mtd8 of=/sdcard/tcc.img bs=4096
    Thank you
     
  2. bzeemomof4

    bzeemomof4 Member

    Joined:
    May 23, 2011
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    60
    Location:
    California
    Tablet / Device:
    g tablet
    Did you ever get these files? If not i have a working tablet and one that is not working I would like to make a copy of the files you listed above but I do not know where I am supposed to enter these commands -a terminal emulator? if so then how do you then get them executed on the bricked device? I can get the bricked device to go into Fastboot mode and was able to write the 3e recover to it but that is as far as I get
     

Share This Page