Amlogic official ARM GPL downloads and documentation

madmalkav · Apr 3, 2011

Arm - Amlogic

Nice to see some SoC producers still feels some respect for GPL.

xaueious · Apr 3, 2011

Well the SoC manufacturers are expected to...

Thanks for the heads up.

tstonick · May 25, 2011

xaueious said:
Well the SoC manufacturers are expected to...

Thanks for the heads up.

I'm trying to play with this stuff, but I don't know what to put in when git asks for git@openlinux.amlogic.com's password. Any suggestions?
I've bricked both my units trying to install the custom firmware for the W10, obviously, there's some difference in the boards. The vendor is lame and won't send me the original firmware. They're not totally bricked, but the recovery screen no longer allows button navigation and the video driver is messed up, so why not forge ahead and try building my own images.

Any ideas on that password?

shadowofzeus · May 26, 2011

tstonick said:
I'm trying to play with this stuff, but I don't know what to put in when git asks for git@openlinux.amlogic.com's password. Any suggestions?
I've bricked both my units trying to install the custom firmware for the W10, obviously, there's some difference in the boards. The vendor is lame and won't send me the original firmware. They're not totally bricked, but the recovery screen no longer allows button navigation and the video driver is messed up, so why not forge ahead and try building my own images.

Any ideas on that password?

Hey have you seen this. This guy figured out how to fix a bad firmware flash using linux and an 2gb microsd. Here is the link.

[ROM] Ramos W10 - Development Thread. - SlateDroid.com - Page 5

tstonick · May 26, 2011

I'll check that out. I thought I had already looked there. Thanks.

tstonick · May 26, 2011

tstonick said:
I'll check that out. I thought I had already looked there. Thanks.

I actually already tried that. They're not bricked per se', but the recovery image ain't quite compatible. So, I'm going to build a new one. I just need someone to tell me how to actually get the code from the git repository, because it keeps asking for a password.

When you do this

Code:

repo init -u [EMAIL="git@openlinux.amlogic.com:platform/manifest.git"]git@openlinux.amlogic.com:platform/manifest.git[/EMAIL] -b froyo-amlogic-mid

You are asked for the password for git@openlinux.amlogic.com. I don't know it. I tried to use my own email, but it didn't work. Maybe I'm not "gitting" it correctly? Can someone correct me on this?

shadowofzeus · May 26, 2011

You might have to email Amlogic for it. I know when you compile Cyanogenmod source there is no password.

tstonick · Jun 2, 2011

Success!!! I have obtained from AMLogic the procedure for getting their source. I have included it below. Please anyone distribute this wherever it may be appropriate. The formatting of the copy/paste here is nasty. I don't know how to attach the file, so if anyone can help there. Or PM me I suppose if you want me to send it to you.

Code:

 [CENTER][CENTER][U][B]Openlinux Access Request Procedure[/B][/U][/CENTER]
[/CENTER]
    Openlinux is public server Amlogic uses to make source code accessible for authorized Amlogic partners.  The server is physically located in Beijing, China and managed by Amlogic IT.
  ONLY READ-ONLY ACCESS TO THE SERVER WILL BE PERMITTED.
   The following procedures should be followed to grant 3rd party partner access.
  [FONT=OpenSymbol]&#8226;    [/FONT]PMU
               To grant new access:
  [B][FONT=&quot]1)      [/FONT][FONT=&quot]Receive and evaluate code access request from Amlogic partners.[/FONT][/B]

                    The partner will need to submit a public key to access our code base.
                    To generate public key, on Linux shell type
  [FONT=&quot]            $ ssh-keygen -t rsa[/FONT]
  [FONT=&quot]            $ cd ~/.ssh[/FONT]
  [FONT=&quot]            $ cat id_rsa.pub[/FONT]
        The id_rsa.pub is the generated public key and needs to be submitted to Amlogic.
        AMLOGIC ONLY SUPPORTS [B]LINUX[/B]DEVELOPMENT PLATFORM.
  [B][FONT=&quot]2)      [/FONT][FONT=&quot] F ill out internal Amlogic Openlinux Access Request form show below.[/FONT][/B]

  [B][FONT=&quot]3)      [/FONT][FONT=&quot] PMU leader s end the completed form with an written approval email to IT.[/FONT][/B]

  [B][FONT=&quot]4)      [/FONT][FONT=&quot] Upon IT processing completion  (up to 24 hour turn around), forward access approval notice to partner.[/FONT][/B]

              To revoke access:
  [B][FONT=&quot]1)                  [/FONT][FONT=&quot] Upon partnership termination, fill out internal Amlogic Openlinux access Request form to revoke code access  privilege.[/FONT][/B]

  [FONT=&quot]2)                  [/FONT]PMU leader send the completed form with an written approval email to IT.
   
  [FONT=OpenSymbol]&#8226;    [/FONT]IT
  are  authorized to grant or revoke access [B][I][U]if and only if the following procedures are followed:[/U][/I][/B]
  [FONT=&quot]1)                  [/FONT]IT receives the completed Openlinux Request Form shown below from .
  [FONT=&quot]2)                  [/FONT]IT receives written email approvals from the PMUleaders.
  [FONT=&quot]3)                  [/FONT]IT will process the request within 24 hours and notify PMU leaders upon completion.  
  [U][FONT=&quot]
 [/FONT][/U]  
  [CENTER][CENTER][B][U] Openlinux Access Request Form[/U][/B][/CENTER]
[/CENTER]
            [CENTER][CENTER]First Name[/CENTER]
[/CENTER]
          
             [CENTER][CENTER]Last Name[/CENTER]
[/CENTER]
          
             [CENTER][CENTER]Company Name[/CENTER]
[/CENTER]
          
             [CENTER][CENTER] Amlogic    Sponsor Name[/CENTER]
[/CENTER]
          
             [CENTER][CENTER]Amlogic Sponsor   Email[/CENTER]
[/CENTER]
          
             [CENTER][CENTER]Request Type [/CENTER]
[/CENTER]
   [CENTER][CENTER](new access,   revoke access)[/CENTER]
[/CENTER]
         New access
             [CENTER][CENTER] Public Key    (id_rsa.pub)[/CENTER]
[/CENTER]

madmalkav · Jun 8, 2011

To what email address are we supposed to send the access request?

tstonick · Jun 10, 2011

Sorry, it's been a couple of days since I posted. If you email the request form with your public key to support@amlogic.com, they'll get back to you. I just now this minute thought I had everything set up correctly with the key sent to them, followed the instructions, but I've still got something wrong and haven't got the source yet. I have however stayed up all night screwing with it, so maybe a miracle will happen in the next five minutes before I have to take a shower and get ready for work.

If you're a more experienced developer than I, or are at least better with git,repo,ssh,etc. then you might want to contact

Annie Wong
Amlogic (Shanghai) Inc.
Shenzhen Office
RM.703-706, 7/F, South Area FuAn Building,
1st Gaoxin South Road, Nanshan District,
ShenZhen, China
Tel: 86-755-86315322
Fax: 86-755-86315301
Email: annie.wang@amlogic.com

shadowofzeus · Jun 11, 2011

New firmware release on AMLogics download page. Adds 3g Dongle support and fixes a Video with FLAC audio issue. http://openlinux.amlogic.com/downlo...c-mid-20110526/froyo-amlogic-mid-20110526.tgz Remember this really only works for people with Ramos tablets. It doesn't work for the people with IRobot OEM tablets.

madmalkav · Jun 14, 2011

Still waiting for reply from Amlogic

Enviado desde mi U8100 usando Android Tablet Forum

madmalkav · Jun 22, 2011

Ok, got access to the Git and downloaded the code, I'm currently trying to compile booting kernels, dunno why they are not booting ok on my device.

cheeyee · Sep 23, 2011

Hi madmalkav,

Would you please upload the latest kernel sources? The Ainol Novo8 is also using the 8726M SoC. I am able to compile the the kernel from 04-06 and it is booting on the device. The only problem I have it is that it can't stay powered on without the charger plugged in. The sources from 04-06 is missing a display driver that Ainol Novo8 uses so no display. But I am able to connect to the device with adb tool.

I am hoping the sources that you have will have the drivers for the display and fix for power issue.

Here's a link to the work that I have been doing.

source code Ainol NOVO8 android : Ainol MID - Page 5

Thx,
Chee

shaxter · Sep 26, 2011

madmalkav
Good afternoon. I have a clone of Ramos w10. I managed to compile a kernel driver from source, shared online openlinux.amlogic.com. But I have not earned a usb host. Could you put the downloaded your latest source code. thanks

Amlogic official ARM GPL downloads and documentation

madmalkav

Member

xaueious

Administrator

tstonick

Senior Member

shadowofzeus

Member

tstonick

Senior Member

tstonick

Senior Member

shadowofzeus

Member

tstonick

Senior Member

madmalkav

Member

tstonick

Senior Member

shadowofzeus

Member

madmalkav

Member

madmalkav

Member

cheeyee

Member

shaxter

Member

Similar threads