[TABLE="class: list ol, width: 0"]
[TR]
[TD="class: number"]1.[/TD]
[TD="class: text"]Boot windows from USB drive.[/TD]
[/TR]
[TR]
[TD="class: number"]2.[/TD]
[TD="class: text"]Press a key when you are prompted.[/TD]
[/TR]
[TR]
[TD="class: number"]3.[/TD]
[TD="class: text"]Select a language, a time, a currency, and a keyboard or another input method, and then click Next.[/TD]
[/TR]
[TR]
[TD="class: number"]4.[/TD]
[TD="class: text"]Click Repair your computer.[/TD]
[/TR]
[TR]
[TD="class: number"]5.[/TD]
[TD="class: text"]Click the operating system that you want to repair, and then click Next.[/TD]
[/TR]
[TR]
[TD="class: number"]6.[/TD]
[TD="class: text"]In the System Recovery Options dialog box, click Command Prompt.[/TD]
[/TR]
[TR]
[TD="class: number"]7.[/TD]
[TD="class: text"]Type Bootrec /RebuildBcd , and then press ENTER.[TABLE="class: list ul, width: 0"]
[TR]
[TD="class: bullet"][/TD]
[TD="class: text"]If the Bootrec.exe tool runs successfully, it presents you with an installation path of a Windows directory. To add the entry to the BCD store, typeYes . A confirmation message appears that indicates the entry was added successfully.[/TD]
[/TR]
[TR]
[TD="class: bullet"][/TD]
[TD="class: text"]If the Bootrec.exe tool cannot locate any missing Windows installations, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order in which they are presented. Press ENTER after each command.Bcdedit /export C:\BCD_Backup ren c:\boot\bcd bcd.old Bootrec /rebuildbcd
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[TR]
[TD="class: number"]8.[/TD]
[TD="class: text"]Restart the computer.[/TD]
[/TR]
[/TABLE]
Hi everyone,
Just spent some time installing 3.2 and 4.0 on my viewpad 10 (16g, 1G ram). 3.2 was buggy and slow but 4.0 seems amazing. Everything seems to function so far except for the SD card. Anyone got any ideas on how to implement that? I understand it might have something to do with the .vold (don't really understand how to alter that). If someone has a step by step guide that would be helpful. Also netflix app in market says that it not compatible with this device. Don't see why it wouldn't be. Anyone?
Thanks
Hi everyone,
Just spent some time installing 3.2 and 4.0 on my viewpad 10 (16g, 1G ram). 3.2 was buggy and slow but 4.0 seems amazing. Everything seems to function so far except for the SD card. Anyone got any ideas on how to implement that? I understand it might have something to do with the .vold (don't really understand how to alter that). If someone has a step by step guide that would be helpful. Also netflix app in market says that it not compatible with this device. Don't see why it wouldn't be. Anyone?
Thanks
If you installed android 4.0RC1 it would be under mnt/microsd. Also a lot of apps won't work because this is an x86 processor and most apps like Netflix is designed for arm processors, also netflix requires flash which doesn't work and never will on x86 platforms.
Is this ICS version preferred as opposed to the 3.2 Version?
Also, is there a list of the apps that are compatible with x86 processors, as it is quite annoying going through the market and having basically every single interesting app telling me it isn't compatible.
