APAD IROBOT problem...please help me!!!!

leandresca

Member
Aug 15, 2010
1
0
Hi....I have an APAD IROBOT 7" red led.....(this):

1.100 MHz
Rochchip Dual Core 600 MHz + 500 MHz
2 GB RAM: 128 MB

I has try to update to 5.1...but during the update I have a problem....this:
2s1r5m9.jpg


Now my APAD no signs of life .... if I put the led in charge ... must have corrupted the firmware ... and will not turn on ... is there a way to reset ... please save ... save!
 

xaueious

Administrator
Staff member
Jul 9, 2010
3,483
436
Probably wrong firmware on a 9v Red LED Apad.

Try a battery drain (leave switch on, unplug everything, leave alone for at least a whole day)

If you got lucky, your device might not have flashed anything.
 

ZilverZurfarn

Member
May 3, 2010
133
8
Had the same problem. Turned out to be solved by finding the right USB cable. Tried at least 5 different cables, until I stumbled on one that did work. Can't understand why this should be so critical, but obviously it is.
 

narina

Member
Sep 17, 2010
1
0
i've received my irobot android today but i have a problem when i try to turn it on the green light did appear but nothing show up on the screen even when i plugged the ac adaptor...then when i plugged the adaptor the red light only appear about 48 sec is it normal...
 

abdolluh

Member
Dec 31, 2010
1
0
i just got an epad for Christmas and it worked fine for a couple of day un till one day it froze so i turned it off but when i turn it back it just wont go pass the android logo can some one please help me :cool:
 

Delta2011

Member
Jan 1, 2011
1
0
I have the same problem. I got my APAD, I think shipped from CHINA. Use it for couple of times and now it got stuck. It wont pass android logo.
 
Top