please help me for unbrick my Iconia

You should fully charge your tablet before you do anything.
 
hi sir
yes i know that but my tablet dont get any charge
I want open that I think maybe i can charge battery alone
 
hi sir
yes i know that but my tablet dont get any charge
I want open that I think maybe i can charge battery alone
Don't you have supply?
If you have a car you can get an inverter which converts 12v DC to 240VAC. Then plug your A500 power pack into the inverter.
 
after brick tablet can not be charge with charger normally and for installation a rom you must have been full charged tablet
iconia battery is 4A power and i need to a charger with this amount of power and maximum 12 V DC outlet
 
I don't know if this will help but there is an app in the Market called Acer Recovery Installer by Interphaze Solutions. They claim it will return your rooted tablet back to factory condition. Good luck.
 
When your tablet is powered down - in other words turned off - you can charge the tablet. It is not possible for it to be software contrlled when the tablet is off. Icebike will agree I think.
 
That may be true, then I would try powering it off and trying to charge it to see what happens. It might just be that the charge indicator is wrong because the software isn't running. When charging with power off it still gives an orange power button while charging and turns white when finished.
 
When charging with power off it isn't give orange light on power button and power button led is off
 
Check your wall charger with an multimeter. It's 12v (+) center
 
When charging with power off it isn't give orange light on power button and power button led is off
something wrong with your charger. Is it the original ACER plug pack that comes with the tablet? If it is not the charger will not work with tablet.
 
thanks for your attentions
my charger is orginal and i tested it by multimeter there is 12V dc
i buy an external 9V & 5A charger to charg my battery without my tab
please pray for me


from Nokia N900
 
Back
Top