i just recently rooted my tablet with unlockroot i am gladly my tab is not brick and i want to install a custom recovery through emulator called terminal
can i use this command or instruction to install the cwm recovery through terminal?
1. Place the CWM Recovery Image file onto your Desktop.
2. Connect your device to your PC using the USB cable.
3. Copy the Recovery Image over to the root of your SD card. It’s the topmost folder you see when you open File Manager.
4. Once it’s copied, unplug the device from your PC.
5. Download and install the Terminal Emulator app on your device using the link provided above.
6. Launch the app from your App Drawer by tapping the app icon.
7. In the app, type in following
command:su
8. Next, enter the following command into the app. Make sure to replace cwm.img with the actual name of the recovery image you downloaded.
dd if=/sdcard/cwm.img of=/dev/block/mmcblk0p13
9. Close the app.
10. Reboot the device.11. You’re all done!Cheers! The ClockworkMod Recovery has successfully been installed on your device and the custom ROMs are no away from you!
thanks if you reply
here is the link of that thread if you dont under stand my writing http://theunlockr.com/2013/01/28/how-to-install-clockworkmod-recovery-on-the-zte-warp-sequent/
can i use this command or instruction to install the cwm recovery through terminal?
1. Place the CWM Recovery Image file onto your Desktop.
2. Connect your device to your PC using the USB cable.
3. Copy the Recovery Image over to the root of your SD card. It’s the topmost folder you see when you open File Manager.
4. Once it’s copied, unplug the device from your PC.
5. Download and install the Terminal Emulator app on your device using the link provided above.
6. Launch the app from your App Drawer by tapping the app icon.
7. In the app, type in following
command:su
8. Next, enter the following command into the app. Make sure to replace cwm.img with the actual name of the recovery image you downloaded.
dd if=/sdcard/cwm.img of=/dev/block/mmcblk0p13
9. Close the app.
10. Reboot the device.11. You’re all done!Cheers! The ClockworkMod Recovery has successfully been installed on your device and the custom ROMs are no away from you!
thanks if you reply
here is the link of that thread if you dont under stand my writing http://theunlockr.com/2013/01/28/how-to-install-clockworkmod-recovery-on-the-zte-warp-sequent/
Last edited: