CFW Coby Kyros 7024/8024

F

flxrms

Senior Member
Developer
Mar 23, 2011
365
52
 
Hi flxrms. Thank you for your magic and for sharing it. Please, tell us something about your 2.3 cfw.
 
The gingerbread is based on old version of Genesis by prox32 of slateroid.

Sent from my typewriter.
 
flxrms said:
The gingerbread is based on old version of Genesis by prox32 of slateroid.Sent from my typewriter.
Click to expand...
Thank you. I found all the necesary info inside the rar file. By the way, very, very nice the way you organized the files in the rar.
 
Hi flxrms,

I'm using kyros 7024 rooted with default ROM. Then I downloaded your Gingerbread 7024/8024 ROM. I copied all files to the INTERNAL SDCARD after formated SDCARD with FAT32. I turned off it and power on while holding HOME button. It appeared "upgrade firmware activated" and begin upgrade. when it came to state flashing system, it said FAILED and check a log file I don't remember its name. Now it can't power on and I think it bricked :(

Could you show me how to fix it please?
This tablet is my brother's, he will kill me if he know I destroyed it. Thank you in advance.
 
Hi I need specific step by step directions on how to add the google andriod marketplace to a CobyMID7022. I have seen post that talk about clock recovery and some apk. Can some please forward me in the direction to get the google android marketplace downloaded successfully. Thanks in advance
 
blacky said:
Hi flxrms,

I'm using kyros 7024 rooted with default ROM. Then I downloaded your Gingerbread 7024/8024 ROM. I copied all files to the INTERNAL SDCARD after formated SDCARD with FAT32. I turned off it and power on while holding HOME button. It appeared "upgrade firmware activated" and begin upgrade. when it came to state flashing system, it said FAILED and check a log file I don't remember its name. Now it can't power on and I think it bricked :(

Could you show me how to fix it please?
This tablet is my brother's, he will kill me if he know I destroyed it. Thank you in advance.
Click to expand...

The cfw is base on old version of Genesis and really stable so I'm really not sure why it failed ... i can recommed steev's latest Tsunami firmware for 7024 to try to flash it again.
Let's just hope its just a soft brick. We already have a thread on how to recover.

Btw did you follow the instructions properly?

Sent from my typewriter.
 
Last edited:
Hi, after 3 hours research the forums, I finally revive my tablet. God bless me! It's a soft brick. Now another question: follow your instruction, do I format my INTERNAL sdcard with full format or quick format ? I think I got error when I did quick format last time. thanks
 
blacky said:
Hi, after 3 hours research the forums, I finally revive my tablet. God bless me! It's a soft brick. Now another question: follow your instruction, do I format my INTERNAL sdcard with full format or quick format ? I think I got error when I did quick format last time. thanks
Click to expand...
do not use "quick" format.
...but i see you say above "format my internal" ? ? ? huh ? i never format the internal for a firmware load. . ( for me ) i take out the external sd and put the small guy into the carrier, and then plug it all into the reader hanging off my one usb cable. . when i plug it in, up pops a windoze alert stating that it see a new drive attached ( g: ). . and then i use the official sd formatter ( i downloaded the HP one and is at version 3 ) and NOT the windoze formatter . . .
 
Hi flxrms,
I ALSO have same problen like another guy here BLACKY please give solution
I'm using kyros 7024 rooted with default ROM. Then I downloaded your Gingerbread 7024/8024 ROM. I copied all files to the INTERNAL SDCARD after formated SDCARD with FAT32. I turned off it and power on while holding HOME button. It appeared "upgrade firmware activated" and begin upgrade. when it came to state flashing system, it said FAILED and check a log file I don't remember its name. Now it can't power on and I think it bricked
Could you show me how to fix it please
 
Read the instructions again: to update the firmware, the normal procedure is to copy the firmware files to the external microSD card, not the internal. That's why you bricked your tablet.

Simply format a card using FAT32 on your computer, copy the firmware files to it and repeat the update process with the card in the tablet's external slot (turn it on holding the silver button).
 
I'm using kyros 7024 rooted with default ROM. Then I downloaded your Gingerbread 7024/8024 ROM. I copied all files to the INTERNAL SDCARD after formated SDCARD with FAT32. I turned off it and power on while holding HOME button. It appeared "upgrade firmware activated" and begin upgrade. when it came to state flashing system, it said FAILED and check a log file I don't remember its name. Now it can't power on and I think it bricked :(
please give me some solution otherwise my father gonna kill when he come to know it please help me(flxrms)
what i have to do now
 
You must log in or register to reply here.

Similar threads

F
Coby Kyros 7024 running a modified Official Kyros 8024 firmware :)
2 3 4
Replies
47
Views
21K
lfom
lfom
M
Coby Kyros 7024 Touch Screen unresponsive after startup
Replies
3
Views
9K
surgeman
S
lfom
[CFW][WiP] CyanogenLF - CyanogenMod7 for Kyros 7024/8024/1024
2
Replies
19
Views
21K
ray_jai
R
gamewarrior66
Information needed for Coby Kyros 8024, Thanks!
Replies
3
Views
3K
pyr0dud3
P
K
Fix Problem with Original Firmware in Coby Kyros 7024
Replies
9
Views
6K
lfom
lfom
Back
Top