MID7022-4G : SD slot

[winndix60]

When I push the micro-sd card in, it doesn't have a "spring" release mechanism. Is that the same for everyone else? I find it hard to believe, but the unit is reading the card. Nothing big, I just use a pin to wiggle the card out, when I have to.

just wondering if this is common

 

[lfom]

In my MID1024 I have to use my finger nail to release one of my microSD cards. The other one, by Sandisk, works just fine. It seems that different cards may have different sizes.

 

[trickbiker121]

When I push the micro-sd card in, it doesn't have a "spring" release mechanism. Is that the same for everyone else? I find it hard to believe, but the unit is reading the card. Nothing big, I just use a pin to wiggle the card out, when I have to.

just wondering if this is common

My MID7022 has a spring release. Sounds like a defective device.

Sent from my MID7022 using Tapatalk

 

[nba1341]

Yes I also have spring release but its hard to get nail in there to release

 

[CHightshoe]

I just got a 7022 for Christmas and so far I can't the micro SD card I have from old blackberry to seat in the slot - have verified I'm putting it in correctly, but it will not click in place - it's a sandisk 4gb SDHC

Anyone have any suggestions or is this possibly just a defect that needs to be corrected by Coby

Thanks

 

[Stanky626]

The micro SD should slot in without any struggling. My card slides in and clicks. It also has a spring loaded release.

 

[Spider]

Others have reported problems and it turned out they weren't pushing the card in far enough to latch or unlatch it. Worth a try?

 

[mzung]

Spider is correct, I have to use my nail to finish pushing in the card to the click. But on the other hand, my spring works once I use my nail to push it back in to release it.