Hello, I bought my Identity pad from S-Korea last year, It was E201K.
When Enspert launched their E201U in US I was happy, atleast I get fully international version of firmware. Got firmware from Enspert and installed it, Everything worked lika a charm.
When I connected to wifi, tablet said that even newer firmware is avaiable and asked if Id like to download it - I thought why not and it started downloading. After download finished It said to reboot my device and press reset button to initialize firmware upgrade - I followed. It started to do its stuff and after ten or so minutes screen went black. So I waited more and nothing happend for another ten minutes. I started to get suspicious and tried to swich tablet on - nothing. Pressing buttons - nothing.
Pressed reset button and it only vibrated for a second.
And there I am now. Nothing works and pressing reset button makes It vibrate only once. Its draining battery tho, so if I leave it to as it is, it will be unresponsive after few days, then if I plug it back to computer - it gets power and all it does, is only vibrating once after reset button press.
After plugging to USB it does nothing, computer does not pick it up etc.
I have tried all kind of recovery button combitantions, nothing seem to work.
Holding power delays that second long vibration a bit but nothing else.
Teared the tablet apart and if one removes the battery there is an unknown connector, probably for flashing or something. Nothing more info on that one.
Even connected to US Enspert and they were very helpful but couldnt give any specific ansvers and since I didnt buy the device from them, couldnt offer any more support. And Korean manufacturer is not responding to me at all.
Enspert said that they dont know any button combination to get device to recovery mode - maybe there is no recovery mode?
Does anyone have any ideas I could try or this device is only good for paperwaight from now on. Since going to S-Korea to repair it is unthinkable.
Best wishes, Martin
When Enspert launched their E201U in US I was happy, atleast I get fully international version of firmware. Got firmware from Enspert and installed it, Everything worked lika a charm.
When I connected to wifi, tablet said that even newer firmware is avaiable and asked if Id like to download it - I thought why not and it started downloading. After download finished It said to reboot my device and press reset button to initialize firmware upgrade - I followed. It started to do its stuff and after ten or so minutes screen went black. So I waited more and nothing happend for another ten minutes. I started to get suspicious and tried to swich tablet on - nothing. Pressing buttons - nothing.
Pressed reset button and it only vibrated for a second.
And there I am now. Nothing works and pressing reset button makes It vibrate only once. Its draining battery tho, so if I leave it to as it is, it will be unresponsive after few days, then if I plug it back to computer - it gets power and all it does, is only vibrating once after reset button press.
After plugging to USB it does nothing, computer does not pick it up etc.
I have tried all kind of recovery button combitantions, nothing seem to work.
Holding power delays that second long vibration a bit but nothing else.
Teared the tablet apart and if one removes the battery there is an unknown connector, probably for flashing or something. Nothing more info on that one.
Even connected to US Enspert and they were very helpful but couldnt give any specific ansvers and since I didnt buy the device from them, couldnt offer any more support. And Korean manufacturer is not responding to me at all.
Enspert said that they dont know any button combination to get device to recovery mode - maybe there is no recovery mode?
Does anyone have any ideas I could try or this device is only good for paperwaight from now on. Since going to S-Korea to repair it is unthinkable.
Best wishes, Martin