Viewpad 10s (3G+ Wifi) Bricked.

[gautam.malik]

Hi,
I need urgent help.
I tried installing roms from this website (honeycomb version)
It gave me the following error

C:\Users\XYZ\AppData\Local\Temp\7ZipSfx.000>nvflash.exe --bct H5PS1G83EFR-
6C_V24_0625.bct --setbct --bl bootloader.bin --configfile flash.cfg --odmdata 0
0b0c0075 --create --go
Nvflash started
rcm version 0X20001
System Information:
   chip name: t20
   chip id: 0x20 major: 1 minor: 3
   chip sku: 0x8
   chip uid: 0x02885044427fe417
   macrovision: disabled
   hdcp: enabled
   sbk burned: false
   dk burned: false
   boot device: nand
   operating mode: 3
   device config strap: 0
   device config fuse: 0
   sdram config strap: 0
sending file: H5PS1G83EFR-S6C_V24_0625.bct
- 4080/4080 bytes sent
H5PS1G83EFR-S6C_V24_0625.bct sent successfully
odm data: 0xb0c0075
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 1 0
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: MSC
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: USP
creating partition: UDA
Formatting partition 2 BCT please wait.. done!
Formatting partition 3 PT please wait.. done!
Formatting partition 4 EBT please wait.. done!
Formatting partition 5 MSC please wait.. done!
Formatting partition 6 SOS please wait.. done!
Formatting partition 7 LNX please wait.. done!
Formatting partition 8 APP please wait.. done!
Formatting partition 9 CAC please wait.. done!
Formatting partition 10 USP please wait.. done!
Formatting partition 11 UDA please wait.. done!
done!
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
sending file: recovery.img
\ 5064704/5064704 bytes sent
recovery.img sent successfully
sending file: boot.img
\ 4311040/4311040 bytes sent
boot.img sent successfully
sending file: system.img
/ 3145728/120449472 bytes sentdata send failed NvError 0x120002
command failure: create failed (bad data)
Press enter to continue:

Now I cannot boot my Viewpad.
How can I recover it and upgrade to honeycomb properly.

Thanks.

 

[Legionnaire]

I suggest you http://www.androidtablets.net/forum...m-viewcomb-3-2-honeycomb-3-2-viewpad-10s.html

 

[gautam.malik]

I suggest you http://www.androidtablets.net/forum...m-viewcomb-3-2-honeycomb-3-2-viewpad-10s.html

I tried this, but I am getting the same error again and again.
Is there any other way of flashing the rom?

 

[gautam.malik]

I tried this, but I am getting the same error again and again.
Is there any other way of flashing the rom?

Also, can you please give me instructions to revert back to stock?
My Viewpad 10s is completely bricked now.

 

[gautam.malik]

I suggest you http://www.androidtablets.net/forum...m-viewcomb-3-2-honeycomb-3-2-viewpad-10s.html

I finally fixed the problem.
I went to XDA forums - [ROM] [3.2] Vegacomb 3.2 Build 9n and 9b Update3 - xda-developers and Downloaded - "VegaComb HC3.2 9b Installer.exe"
It installed some files to my PC (Windows 7) and then installed honeycomb 3.2 to the tablet.
Finally, I am relieved now.

Just one question - How do I go back to stock ViewPad 10s Froyo (unrooted)?

 

[htwoo]

I finally fixed the problem.
I went to XDA forums - [ROM] [3.2] Vegacomb 3.2 Build 9n and 9b Update3 - xda-developers and Downloaded - "VegaComb HC3.2 9b Installer.exe"
It installed some files to my PC (Windows 7) and then installed honeycomb 3.2 to the tablet.
Finally, I am relieved now.

Just one question - How do I go back to stock ViewPad 10s Froyo (unrooted)?

You can get the Viewpad 10s Stock ROM from here

 

[ghostrecn]

I finally fixed the problem.
I went to XDA forums - [ROM] [3.2] Vegacomb 3.2 Build 9n and 9b Update3 - xda-developers and Downloaded - "VegaComb HC3.2 9b Installer.exe"
It installed some files to my PC (Windows 7) and then installed honeycomb 3.2 to the tablet.
Finally, I am relieved now.

Just one question - How do I go back to stock ViewPad 10s Froyo (unrooted)?

thanx dude

u really saved me

i used 3.2b not n

finally it works

this Android 3.2 is lovely

so so so so fast

btw , how to increase thre resolution

as the display is so small

thanxxxxxxxxxxx

 

[fazlinuz]

Hi,
i need urgent help...
my viewpad seem like bricked after i'm trying install rom from this website..
below are the error :

C:\Users\fiza\AppData\Local\Temp\RarSFX1>nvflash.exe --bct H5PS1G83EFR-S6C_V24_0
625.bct --setbct --bl bootloader.bin --configfile flash.cfg --odmdata 0x0b0c0075
--create --go
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x028040c64260a457

macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0

sending file: H5PS1G83EFR-S6C_V24_0625.bct
- 4080/4080 bytes sent
H5PS1G83EFR-S6C_V24_0625.bct sent successfully
odm data: 0xb0c0075
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 941512/941512 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
failed executing command 11 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
3 (0x3) flags: 0

Press enter to continue:

how can i recover it.
have anyone face these problems...
how to solve it...

 

[fazlinuz]

BTW, when the DVC boots , I can confirm that is still on Debugg mode on USB (I can use ADB ( Nvidia Usb Boot Recovery)) But don't know what to do.

i'm trying a few times with another rom's, but the problem still same

Please help me !!