MID7024 BLUETOOTH; Using Alldro2 ROM by Steev

Discussion in 'Coby Generation 2 Development' started by shawnki91, Jan 14, 2012.

  1. shawnki91

    shawnki91 Member

    Dec 17, 2011
    Likes Received:
    Trophy Points:
    Tablet / Device:
    Coby Kyros MID 7024-4G
    Hi all,

    Using Steev's Alldro 2 ROM (v.1.1 at the time), I have been able to figure out a wireless bluetooth connection using an off-the-shelf bluetooth dongle. I can now wirelessly share files between my Mac and Tablet. It makes things much easier especially when you transfer numerous items between device and Mac.

    Walk in to your local computer shop. and ask for a generic USB bluetooth dongle.

    Using the MID7024 host cable, plug the dongle in to the female-USB port of the host cable

    Open the power control widget on the tablet, and turn on USB host mode

    When the power is fully on, then press the bluetooth toggle

    If everything works, you should be able to see a blue LED flashing on the dongle.

    Make your Mac bluetooth discoverable, and scan for devices using the tablet

    The devices will pair but will not connect; this is ok. On the Mac's status bar, select your MID7024(will appear as GT-1000 in the device list), and then click send file. Choose a file to send, and confirm the transfer on the tablet. You're done. You can now transfer books, music, movies, documents, apks, etc. from your Mac to the tablet wirelessly.


Share This Page