Look at how much faster the 2.3 is! if it was just a little better I think it would be perfect minus the bluetooth not really working
Trying to Identify Kernel, Possible Overclocking Possibilities for DM7022 Radio
- Thread starter rvcullen
- Start date
TDI_Votex
Member
- Nov 5, 2011
- 32
- 6
Ok. Now for those who will stick with there 7022 (or even if the 7033 has the same problem), I managed to patch the GPS speed with the help of this: GPS speed error ?. 
Speed is back to spec, but I did not crosscheck with another GPS to see if it is really knots instead of m/s. If there is still an error, please report it and I will change the factor in the file.
MEGAUPLOAD - The leading online storage and file delivery service
Because the /system partition is almost full, I had some problem pushing the framework.jar file in /system/framework. The rm -r command does not instantly free up the space in the partition, and I had to reboot without this file. The boot stopped at the small rodent in the upper left corner and I was able to "adb push" the file from there. I did not wipe the dalvik-cache, so it took some reboot before the patch made it's way.
Now for the 7033. Do you think it would be possible to pull the 2.3 from it, thin it and push it in the 7022?
Speed is back to spec, but I did not crosscheck with another GPS to see if it is really knots instead of m/s. If there is still an error, please report it and I will change the factor in the file.
MEGAUPLOAD - The leading online storage and file delivery service
Because the /system partition is almost full, I had some problem pushing the framework.jar file in /system/framework. The rm -r command does not instantly free up the space in the partition, and I had to reboot without this file. The boot stopped at the small rodent in the upper left corner and I was able to "adb push" the file from there. I did not wipe the dalvik-cache, so it took some reboot before the patch made it's way.
Now for the 7033. Do you think it would be possible to pull the 2.3 from it, thin it and push it in the 7022?
techically, it should be able to port the O/S from DM7033 and flash it on DM7022. Many people do it on the cellphone but I don't know how. Maybe, it is a interesting project to discovery.
V2.1 and V2.3 is different. I think the bootsector too.
I have a Mygiga Enjoy TV (Android 2.1). Manefacturer release the v2.3 upgrade and it needs to flash the boot partition too. My unit run super fast after upgrade. I think v2.3 has a fast kernel
After I have DM7033, you guy (who know how to port and flash) can have my DM7022 for free and you can play around the flashing stuff. It will benefit for all the people who stuck with DM7022
V2.1 and V2.3 is different. I think the bootsector too.
I have a Mygiga Enjoy TV (Android 2.1). Manefacturer release the v2.3 upgrade and it needs to flash the boot partition too. My unit run super fast after upgrade. I think v2.3 has a fast kernel
After I have DM7033, you guy (who know how to port and flash) can have my DM7022 for free and you can play around the flashing stuff. It will benefit for all the people who stuck with DM7022
Last edited:
Who is this from and how do you order? what is the method of payment?
No worries, I do not really expect it to be an ipad.
see my post on page 12
Oh yeah I emailed them haven't heard back yet
Adriano.trindade
Member
- Dec 4, 2011
- 2
- 0
Hello my friends, you have managed to successfully upgrade your android DM7022?
spacey
Member
- Dec 23, 2011
- 40
- 6
Hi All,
I've been following the thread here for a while and finally took the plunge and purchase my ES777A unit and so far so good. A couple of little issues that I see other people have experienced here:
The PAD doesnt find a GPS single when its not in the Car unit. I was told by Erisin the GPS was built into the PAD but that doesnt look to be the case. The pad has a turn GPS on and off section but it never finds a thing until its plugged back in the main car unit. Does anybody know if this is this correct or could I have a faulty PAD?
Secondly the GPS looks to have a software fault mentioned within this thread.. As the speed is almost doubled whatever you actually doing. e.g. youre doing 50 it say 102. its the same whether youre the software is set to mph or kph. I've also tested it side by side with my existing GPS device and that fine so its not a signal issue.
Will the patch linked within this thread fix it for a 2.3.3 version of Android.
One other thing worth noting is that local time from the GPS signal is miles out almost like its ignoring the local regional settings. Wasnt an issue until I change the locale settings to LONDON, Dublin GMT -0
Also Erisin include a free (probably ripped off) version of IGO but even when you set the units to MPH and not KPH it still reports the current speed as KPH but I guess this a skin issue maybe?
I've also managed to root the device using Super-one-click root application of the xda site. I'd like to back up the ROM before doing anything else but ClockworkMod installs fine, installs the drivers ok, then reboots but fails with "quit this mode, please use hard reset your board" equally any attempt to access the boot loader by hold down the three buttons and resetting device brings up this screen/error. So can you recommend a way of backing up the rom etc and what is the correct procedure to hard reset once of these devices.
Sorry to ask so many questions but one thing Ive learnt (the hard way) since owning this unit... Information and help is almost non-existent.
So hopefully somebody here will have the answers to questions. I know support hasnt managed to answer them yet
Gareth
Ps. if i can manage to back up the ROM, would it be helpful to share the image for those who want to upgrade?? will it even work? Dont mind sharing if itll help.
I've been following the thread here for a while and finally took the plunge and purchase my ES777A unit and so far so good. A couple of little issues that I see other people have experienced here:
The PAD doesnt find a GPS single when its not in the Car unit. I was told by Erisin the GPS was built into the PAD but that doesnt look to be the case. The pad has a turn GPS on and off section but it never finds a thing until its plugged back in the main car unit. Does anybody know if this is this correct or could I have a faulty PAD?
Secondly the GPS looks to have a software fault mentioned within this thread.. As the speed is almost doubled whatever you actually doing. e.g. youre doing 50 it say 102. its the same whether youre the software is set to mph or kph. I've also tested it side by side with my existing GPS device and that fine so its not a signal issue.
Will the patch linked within this thread fix it for a 2.3.3 version of Android.
One other thing worth noting is that local time from the GPS signal is miles out almost like its ignoring the local regional settings. Wasnt an issue until I change the locale settings to LONDON, Dublin GMT -0
Also Erisin include a free (probably ripped off) version of IGO but even when you set the units to MPH and not KPH it still reports the current speed as KPH but I guess this a skin issue maybe?
I've also managed to root the device using Super-one-click root application of the xda site. I'd like to back up the ROM before doing anything else but ClockworkMod installs fine, installs the drivers ok, then reboots but fails with "quit this mode, please use hard reset your board" equally any attempt to access the boot loader by hold down the three buttons and resetting device brings up this screen/error. So can you recommend a way of backing up the rom etc and what is the correct procedure to hard reset once of these devices.
Sorry to ask so many questions but one thing Ive learnt (the hard way) since owning this unit... Information and help is almost non-existent.
So hopefully somebody here will have the answers to questions. I know support hasnt managed to answer them yet
Gareth
Ps. if i can manage to back up the ROM, would it be helpful to share the image for those who want to upgrade?? will it even work? Dont mind sharing if itll help.
The GPS is definitely not built into the pad. Heh, its interesting that the GPS speed still isn't fixed on the new version I never got the fix to work on my 2.1 tab. I think but am not positive you can make a backup in FWDN. I'm not sure if we could load the 2.3 but im guessing no but you can post it anyway
spacey
Member
- Dec 23, 2011
- 40
- 6
So what’s the best way to dump the rom on one of these units (ES777A). Playing around I've found the right combination to access FASTBOOT and FWDN mode but I'm unfamiliar with both. Any and all suggestion most welcome.
I'd normaly use ClockworkMod but i've had no luck with that so far.
Gareth
I'd normaly use ClockworkMod but i've had no luck with that so far.
Gareth
Similar threads
