sharpe351
Member
- Jul 2, 2011
- 337
- 8
Alright, this is pretty easy. I've done this on multiple platforms (ie HoneyComb, Gingerbread, Froyo). It works every time.
In your build.prop (/system/build.prop) you can change this or add this to the file and save your original file. (Always backup).
Enter/edit the following code into your build.prop file:
ro.sf.lcd_density=# (# being any number you like--warning-- the lower you go, the smaller it gets-- highly recommended to start at 170 and go down from there. DO NOT go below 120 as the firmware you use may not support it. I run BrilliantCorners at 140, I ran Flashback at 120, also ran CM7 from Icewyng at 139).
sent from my Brilliant Corners Gtablet using Tapatalk
In your build.prop (/system/build.prop) you can change this or add this to the file and save your original file. (Always backup).
Enter/edit the following code into your build.prop file:
ro.sf.lcd_density=# (# being any number you like--warning-- the lower you go, the smaller it gets-- highly recommended to start at 170 and go down from there. DO NOT go below 120 as the firmware you use may not support it. I run BrilliantCorners at 140, I ran Flashback at 120, also ran CM7 from Icewyng at 139).
sent from my Brilliant Corners Gtablet using Tapatalk